Panasonic WV-NP472E operating instructions Network Setup Parameters vs. Connection Type, Dns, Dhcp

Page 25

3.Click the Setup Menu button. The User authentica- tion dialog appears.

•Enter “admin” in the user name column.

•Click the OK button.

4.Click the Network button on top of the screen. The Network Setup window appears.

5.Set parameters for each item in the Network Setup menu.

The parameters differ depending on the connec- tion type.

■Network Setup Parameters vs. Connection Type

Connection type	Item	Description of the parameter

Connection type 1	IP address	Enter “192.168.0.XXX” for the IP address (where XXX should
		be a number from 2 to 254 except the same IP addresses
		already assigned to the PC and any other cameras).

	Subnet mask	Use the default setting “255.255.255.0” for the subnet mask.

	Default gateway	No setting required

	Network speed	Set the network speed.
		Use the default setting “auto” for the network speed.
		Selectable parameters: auto (default setting), 100 Mbps (full
		duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10
		Mbps (half duplex)

	HTTP port	Use the default setting “80” for the HTTP port.

	Host name	No setting required

	DNS	Set to OFF.

	Primary server	No setting required

	Secondary server

	DHCP	Set to OFF.

-25-

Image 25

Contents Operating Instructions Risk of Electric Shock Do not Open Contents TCP/IP, HTTP, FTP, SMTP, DNS, Dhcp PrefaceClean the CCD faceplate with care PrecautionsHandle the camera with care Never face the camera toward the sunMajor Operating Controls and Their Functions Replacement of Auto Iris Lens Connector InstallationsMounting the Lens Notes Mounting from the Bottom Flange-back AdjustmentMounting from the Top Pictures Upside-downConnections Power-in ConnectionsControl Terminal Connections Video Cable ConnectionsConnection to Internet Type Connection to Intranet TypePreliminary Setup Access from the PCOperating the Camera Network Speed Select a speed Access from the Camera/System DeviceFunction Comparison / PC Network vs. Camera site Buttons Used for Setup Menus Prior to SET UPCamera Setup Menus ¡From the PC¡From the Camera Camera Identification Camera ID Setting Setting ProceduresALC Mode with SUPER-D2 on Light Control Setting ALC/ELCGain Control Setting AGC on DNR-H, DNR-L/OFF Shutter Speed Setting ShutterALC Mode with SUPER-D2 OFF and ELC Mode Auto-Tracing White Balance Mode ATW White Balance Setting White BALElectronic Sensitivity Enhancement Sens UP ATW1 Auto-Tracing White BalanceLens Drive Signal Selection Lens Drive Motion Detector Setting Motion DETDate Display Clock Setting Manual Fine Adjustment for AWC ATWSpecial Menu Http Port Number To reset to the factory settings Camera ResetConnections SET UP from the PCConnection to Internet Type Connection to Intranet TypeNetwork Setup of the PC Network Setup of the Camera Connection type Description of the parameter Network Setup Parameters vs. Connection TypeDNS DhcpSet to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Day & Night Mode Setup buttons ON/OFF/AUTO Setup Menu buttonReset button ALL Reset Return buttonCamera Setup Menus Alarm Setup Image Setup PC Oriented SET UPImage Capture Size pixels 752x568*, 752x280, 368x280 FTP Client Setup User Setup System Setup Host SetupInitializing Initializing the Setup MenuInitializing the Camera Menu Initializing Html FilesImage Quality Selection Viewing PicturesImage Capture Size pixels 752x568 Monochrome Mode When an Alarm Arises Alarm FunctionsTransferring Picture Files VMD Setup Canceling Alarm DisplayDetection Area Setup EnterReviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output ControlTroubleshooting General SpecificationsNetwork Section Camera SectionOptional Accessories Standard Accessories2003