Panasonic WV-NP472E Viewing Pictures, Image Quality Selection, Image Capture Size pixels 752x568

Page 36

VIEWING PICTURES

■ Image Quality Selection

■ Still Picture Storage to the PC

1.Click the Setup Menu button in the main page. The Network Setup window opens.

2.Click the Image button in the menu bar lined on top of the screen.

The Image Setup window appears.

3.Select the parameters.

Refresh Interval: Fast, Middle, Slow, Very Slow

Image Capture Size (pixels): 752x568, 752x280*,

368x280, 176x136

Quality of Image: Super Fine, Fine, Normal, Rough

Bandwidth Control (kbps): 32, 64, 128, 256, 512, 1 024, Unlimited

*: The 752 x 280 selection is good to display moving images without aliasing, while 752 x 568 selection is good to display motionless images.

4.Click the SET & REBOOT button.

It will take about 5 seconds to set the new parame- ters and reboot the camera.

5.Click the Return button to go back to the main page.

The camera picture can be saved as a still image in your PC.

1.Move the cursor to the picture area in the screen, and right-click to select “Save As”.

2.Enter a file name that is given to the picture, and specify the storage place in the dialog box.

3. Click Save.

-36-

Image 36

Contents Operating Instructions Risk of Electric Shock Do not Open Contents Preface TCP/IP, HTTP, FTP, SMTP, DNS, DhcpPrecautions Clean the CCD faceplate with careHandle the camera with care Never face the camera toward the sunMajor Operating Controls and Their Functions Installations Replacement of Auto Iris Lens ConnectorMounting the Lens Notes Flange-back Adjustment Mounting from the BottomMounting from the Top Pictures Upside-downPower-in Connections ConnectionsControl Terminal Connections Video Cable ConnectionsConnection to Intranet Type Connection to Internet TypeAccess from the PC Preliminary SetupOperating the Camera Access from the Camera/System Device Network Speed Select a speedFunction Comparison / PC Network vs. Camera site Prior to SET UP Buttons Used for Setup MenusCamera Setup Menus ¡From the PC¡From the Camera Setting Procedures Camera Identification Camera ID SettingLight Control Setting ALC/ELC ALC Mode with SUPER-D2 onShutter Speed Setting Shutter Gain Control Setting AGC on DNR-H, DNR-L/OFFALC Mode with SUPER-D2 OFF and ELC Mode White Balance Setting White BAL Auto-Tracing White Balance Mode ATWElectronic Sensitivity Enhancement Sens UP ATW1 Auto-Tracing White BalanceMotion Detector Setting Motion DET Lens Drive Signal Selection Lens DriveDate Display Clock Setting Manual Fine Adjustment for AWC ATWSpecial Menu To reset to the factory settings Camera Reset Http Port NumberSET UP from the PC ConnectionsConnection to Internet Type Connection to Intranet TypeNetwork Setup of the PC Network Setup of the Camera Network Setup Parameters vs. Connection Type Connection type Description of the parameterDNS DhcpSet to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Setup Menu button Day & Night Mode Setup buttons ON/OFF/AUTOReset button ALL Reset Return buttonCamera Setup Menus PC Oriented SET UP Alarm Setup Image SetupImage Capture Size pixels 752x568*, 752x280, 368x280 FTP Client Setup User Setup Host Setup System SetupInitializing the Setup Menu InitializingInitializing the Camera Menu Initializing Html FilesViewing Pictures Image Quality SelectionImage Capture Size pixels 752x568 Monochrome Mode Alarm Functions When an Alarm ArisesTransferring Picture Files Canceling Alarm Display VMD SetupDetection Area Setup EnterReviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output ControlTroubleshooting Specifications GeneralNetwork Section Camera SectionStandard Accessories Optional Accessories2003