Panasonic WV-NP472E operating instructions Monochrome Mode

Page 37

■Monochrome Mode

You can switch the camera between the colour mode and black-and-white mode. This may help picture become clear under conditions of insufficient lighting.

1. In the main page, click the Camera Menu button.

2.The Day & Night button appears in the lower-left of the screen.

ON: Selects black-and-white mode.

OFF: Selects colour mode.

AUTO: Selects colour mode when picture is bright enough, or black-and-white mode when it is dark.

3.Click ENTER.

4.Click the Return button to go back to the main page.

Notes:

•Switching to black-and-white will be disabled e in the following cases.

1.The camera setup menu is displayed. (Click Menu OFF.)

2.EXT is set for B/W in the special menu. (Select other than EXT.)

•AUTO1 will perform if AUTO is set in this menu, although in the special menu AUTO2 is set for B/W.

-37-

Image 37

Contents Operating Instructions Risk of Electric Shock Do not Open Contents TCP/IP, HTTP, FTP, SMTP, DNS, Dhcp PrefaceClean the CCD faceplate with care PrecautionsHandle the camera with care Never face the camera toward the sunMajor Operating Controls and Their Functions Replacement of Auto Iris Lens Connector InstallationsMounting the Lens Notes Mounting from the Bottom Flange-back AdjustmentMounting from the Top Pictures Upside-downConnections Power-in ConnectionsControl Terminal Connections Video Cable ConnectionsConnection to Internet Type Connection to Intranet TypePreliminary Setup Access from the PCOperating the Camera Network Speed Select a speed Access from the Camera/System DeviceFunction Comparison / PC Network vs. Camera site Buttons Used for Setup Menus Prior to SET UPCamera Setup Menus ¡From the PC¡From the Camera Camera Identification Camera ID Setting Setting ProceduresALC Mode with SUPER-D2 on Light Control Setting ALC/ELCGain Control Setting AGC on DNR-H, DNR-L/OFF Shutter Speed Setting ShutterALC Mode with SUPER-D2 OFF and ELC Mode Auto-Tracing White Balance Mode ATW White Balance Setting White BALElectronic Sensitivity Enhancement Sens UP ATW1 Auto-Tracing White BalanceLens Drive Signal Selection Lens Drive Motion Detector Setting Motion DETDate Display Clock Setting Manual Fine Adjustment for AWC ATWSpecial Menu Http Port Number To reset to the factory settings Camera ResetConnections SET UP from the PCConnection to Internet Type Connection to Intranet TypeNetwork Setup of the PC Network Setup of the Camera Connection type Description of the parameter Network Setup Parameters vs. Connection TypeDNS DhcpSet to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Day & Night Mode Setup buttons ON/OFF/AUTO Setup Menu buttonReset button ALL Reset Return buttonCamera Setup Menus Alarm Setup Image Setup PC Oriented SET UPImage Capture Size pixels 752x568*, 752x280, 368x280 FTP Client Setup User Setup System Setup Host SetupInitializing Initializing the Setup MenuInitializing the Camera Menu Initializing Html FilesImage Quality Selection Viewing PicturesImage Capture Size pixels 752x568 Monochrome Mode When an Alarm Arises Alarm FunctionsTransferring Picture Files VMD Setup Canceling Alarm DisplayDetection Area Setup EnterReviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output ControlTroubleshooting General SpecificationsNetwork Section Camera SectionOptional Accessories Standard Accessories2003