Panasonic WV-NP472E operating instructions Network Setup of the Camera

Page 24

6.Click “Internet Protocol (TCP/IP)”, and then click the [Properties] button.

7.Click the “Use the following IP address” radio but- ton and enter the IP address and the subnet mask as follows.

IP address	: 192.168.0.9
Subnet mask	: 255.255.255.0

8.Click the [OK] button, and the window dialog box closes.

■Network Setup of the Camera

On completion of the network setup of the PC, begin the network setup of the camera. If multiple cameras are connected, it is required to set up each camera individually. The following information is necessary for the network setup of the camera. If you do not have the following information, refer to your network administrator or your Internet service provider.

•IP address

•Subnet mask

•Default gateway (when using a gateway server or a router)

•Port number

•DNS server address 1 and/or 2 (when using DNS)

1. Start up Internet Explorer on your PC.

2.Enter "192.168.0.10" (the default IP address of the camera) in the address bar. The main page of the camera appears.

-24-

Image 24

Contents Operating Instructions Risk of Electric Shock Do not Open Contents Preface TCP/IP, HTTP, FTP, SMTP, DNS, DhcpPrecautions Clean the CCD faceplate with careHandle the camera with care Never face the camera toward the sunMajor Operating Controls and Their Functions Installations Replacement of Auto Iris Lens ConnectorMounting the Lens Notes Flange-back Adjustment Mounting from the BottomMounting from the Top Pictures Upside-downPower-in Connections ConnectionsControl Terminal Connections Video Cable ConnectionsConnection to Intranet Type Connection to Internet TypeAccess from the PC Preliminary SetupOperating the Camera Access from the Camera/System Device Network Speed Select a speedFunction Comparison / PC Network vs. Camera site Prior to SET UP Buttons Used for Setup MenusCamera Setup Menus ¡From the PC¡From the Camera Setting Procedures Camera Identification Camera ID SettingLight Control Setting ALC/ELC ALC Mode with SUPER-D2 onShutter Speed Setting Shutter Gain Control Setting AGC on DNR-H, DNR-L/OFFALC Mode with SUPER-D2 OFF and ELC Mode White Balance Setting White BAL Auto-Tracing White Balance Mode ATWElectronic Sensitivity Enhancement Sens UP ATW1 Auto-Tracing White BalanceMotion Detector Setting Motion DET Lens Drive Signal Selection Lens DriveDate Display Clock Setting Manual Fine Adjustment for AWC ATWSpecial Menu To reset to the factory settings Camera Reset Http Port NumberSET UP from the PC ConnectionsConnection to Internet Type Connection to Intranet TypeNetwork Setup of the PC Network Setup of the Camera Network Setup Parameters vs. Connection Type Connection type Description of the parameterDNS DhcpSet to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Setup Menu button Day & Night Mode Setup buttons ON/OFF/AUTOReset button ALL Reset Return buttonCamera Setup Menus PC Oriented SET UP Alarm Setup Image SetupImage Capture Size pixels 752x568*, 752x280, 368x280 FTP Client Setup User Setup Host Setup System SetupInitializing the Setup Menu InitializingInitializing the Camera Menu Initializing Html FilesViewing Pictures Image Quality SelectionImage Capture Size pixels 752x568 Monochrome Mode Alarm Functions When an Alarm ArisesTransferring Picture Files Canceling Alarm Display VMD SetupDetection Area Setup EnterReviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output ControlTroubleshooting Specifications GeneralNetwork Section Camera SectionStandard Accessories Optional Accessories2003