Panasonic WV-NP472E Flange-back Adjustment, Mounting from the Bottom, Mounting from the Top

Page 8

•Flange-back Adjustment

The adjustment is required only when a lens without focus-adjusting mechanism is mounted, or when a lens with adjusting mechanism is mounted and focus that is more accurate is needed.

1.Loosen the flange-back fixing screw on the flange- back adjusting ring.

2.Turn the flange-back adjusting ring to obtain a focused point while watching the monitor screen.

3.Tighten the flange-back fixing screw softly and securely.

Note: The object may be out of focus when using a source of near-infrared light rather than using the visible light.

Mounting the Camera

The mounting adapter can be secured on either the top or bottom (at the factory shipment) of the camera. The mounting hole is a standard photographic pan-head screw size (1/4”-20).

Camera-mounting bracket (Locally procured)

Adapter on the bottom at the factory shipment

•Mounting from the Bottom

1.Secure the camera on the camera-mounting brack- et (locally procured), referring to the manual includ- ed with the bracket.

•Mounting from the Top

1.Remove the mounting adapter from the bottom of the camera.

2.Attach the mounting adapter on top of the camera as shown in the figure.

Fixing Screws

Mounting Adapter

WV -NP472

3.Secure the camera to the camera-mounting brack- et (locally procured), referring to the manual includ- ed with the bracket.

Note: Use the original two screws to attach the mounting adapter on the camera. Using short- er ones may cause the camera to fall down, or longer ones may damage the inside of the camera.

•Pictures Upside-down

You can reverse the picture upside-down in the menu setup when it is necessary.

Note: The right and left of the picture are not reversed.

-8-

Image 8

Contents Operating Instructions Risk of Electric Shock Do not Open Contents Preface TCP/IP, HTTP, FTP, SMTP, DNS, DhcpPrecautions Clean the CCD faceplate with careHandle the camera with care Never face the camera toward the sunMajor Operating Controls and Their Functions Mounting the Lens Notes InstallationsReplacement of Auto Iris Lens Connector Flange-back Adjustment Mounting from the BottomMounting from the Top Pictures Upside-downPower-in Connections ConnectionsControl Terminal Connections Video Cable ConnectionsConnection to Intranet Type Connection to Internet TypeOperating the Camera Access from the PCPreliminary Setup Function Comparison / PC Network vs. Camera site Access from the Camera/System DeviceNetwork Speed Select a speed Prior to SET UP Buttons Used for Setup MenusCamera Setup Menus ¡From the PC¡From the Camera Setting Procedures Camera Identification Camera ID SettingLight Control Setting ALC/ELC ALC Mode with SUPER-D2 onALC Mode with SUPER-D2 OFF and ELC Mode Shutter Speed Setting ShutterGain Control Setting AGC on DNR-H, DNR-L/OFF White Balance Setting White BAL Auto-Tracing White Balance Mode ATWElectronic Sensitivity Enhancement Sens UP ATW1 Auto-Tracing White BalanceMotion Detector Setting Motion DET Lens Drive Signal Selection Lens DriveDate Display Clock Setting Manual Fine Adjustment for AWC ATWSpecial Menu To reset to the factory settings Camera Reset Http Port NumberSET UP from the PC ConnectionsConnection to Internet Type Connection to Intranet TypeNetwork Setup of the PC Network Setup of the Camera Network Setup Parameters vs. Connection Type Connection type Description of the parameterDNS DhcpSet to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Setup Menu button Day & Night Mode Setup buttons ON/OFF/AUTOReset button ALL Reset Return buttonCamera Setup Menus Image Capture Size pixels 752x568*, 752x280, 368x280 PC Oriented SET UPAlarm Setup Image Setup FTP Client Setup User Setup Host Setup System SetupInitializing the Setup Menu InitializingInitializing the Camera Menu Initializing Html FilesImage Capture Size pixels 752x568 Viewing PicturesImage Quality Selection Monochrome Mode Transferring Picture Files Alarm FunctionsWhen an Alarm Arises Canceling Alarm Display VMD SetupDetection Area Setup EnterReviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output ControlTroubleshooting Specifications GeneralNetwork Section Camera SectionStandard Accessories Optional Accessories2003