Panasonic WV-NP472E Prior to SET UP, Buttons Used for Setup Menus, Camera Setup Menus

Page 13

PRIOR TO SET UP

This section describes setup procedures common to accesses from the PC and from the camera. The PC can control more functions than camera itself, e.g. transmitting images to FTP server, sending alarm notice mail, auxiliary device control, clock setup, and LED control.

Buttons Used for Setup Menus

Press the buttons on the side panel of the camera, or click the buttons on the computer display. Each button is assigned functions in the setup as follows.

Menu ON/OFF button: Opens or closes the setup menu.

ESC button: Returns to the previous menu (one layer higher) .

UP/DOWN button: Moves up and down the cursor (pointer).

RIGHT/LEFT button: Selects parameters, adjusts some levels.

SET button: Validates the selection, opens a detailed menu.

Pressing RIGHT, SET, LEFT or clicking ALL RESET: Resets all settings to the factory default.

Pressing RIGHT and LEFT, or clicking RESET: Resets the selected settings to the factory default.

Camera Setup Menus

¡From the PC

1.Open the main page of the WV-NP472 camera, referring to page 11.

Login as a level-1 administrator in the dialog box if requested.

2.Click Camera Setup button in the left side of the screen.

Login dialog box will appear.

Note: Confirm the entered IP address when neither the dialog box nor the main page appears. You may need to re-enter the IP address.

3.Enter the registered user name and password. Note: Enter “admin” when you operate the system

very first time, or you have not registered user names yet. For this time, you need not to enter the password.

Menu control buttons will appear under the camera image. Scroll down the bar to display the Reset buttons.

4.Click the Menu ON button to overlay the ** SET UP ** menu on the camera image. The cursor is highlighted on the window.

5.Move the cursor to SET UP DISABLE if it is dis- played, or skip to step 7 if ENABLE is displayed.

6.Click the ENTER button.

DISABLE will change to ENABLE, and the camera is now ready to be set up.

Note: While DISABLE is displayed, setup opera- tions are disabled.

-13-

Image 13

Contents Operating Instructions Risk of Electric Shock Do not Open Contents TCP/IP, HTTP, FTP, SMTP, DNS, Dhcp PrefaceClean the CCD faceplate with care PrecautionsHandle the camera with care Never face the camera toward the sunMajor Operating Controls and Their Functions Replacement of Auto Iris Lens Connector InstallationsMounting the Lens Notes Mounting from the Bottom Flange-back AdjustmentMounting from the Top Pictures Upside-downConnections Power-in ConnectionsControl Terminal Connections Video Cable ConnectionsConnection to Internet Type Connection to Intranet TypePreliminary Setup Access from the PCOperating the Camera Network Speed Select a speed Access from the Camera/System DeviceFunction Comparison / PC Network vs. Camera site Buttons Used for Setup Menus Prior to SET UPCamera Setup Menus ¡From the PC¡From the Camera Camera Identification Camera ID Setting Setting ProceduresALC Mode with SUPER-D2 on Light Control Setting ALC/ELCGain Control Setting AGC on DNR-H, DNR-L/OFF Shutter Speed Setting ShutterALC Mode with SUPER-D2 OFF and ELC Mode Auto-Tracing White Balance Mode ATW White Balance Setting White BALElectronic Sensitivity Enhancement Sens UP ATW1 Auto-Tracing White BalanceLens Drive Signal Selection Lens Drive Motion Detector Setting Motion DETDate Display Clock Setting Manual Fine Adjustment for AWC ATWSpecial Menu Http Port Number To reset to the factory settings Camera ResetConnections SET UP from the PCConnection to Internet Type Connection to Intranet TypeNetwork Setup of the PC Network Setup of the Camera Connection type Description of the parameter Network Setup Parameters vs. Connection TypeDNS DhcpSet to on when using the DNS server Set to on if your internet Internet service provider uses a Set to on if the router uses Dhcp Day & Night Mode Setup buttons ON/OFF/AUTO Setup Menu buttonReset button ALL Reset Return buttonCamera Setup Menus Alarm Setup Image Setup PC Oriented SET UPImage Capture Size pixels 752x568*, 752x280, 368x280 FTP Client Setup User Setup System Setup Host SetupInitializing Initializing the Setup MenuInitializing the Camera Menu Initializing Html FilesImage Quality Selection Viewing PicturesImage Capture Size pixels 752x568 Monochrome Mode When an Alarm Arises Alarm FunctionsTransferring Picture Files VMD Setup Canceling Alarm DisplayDetection Area Setup EnterReviewing Alarm Pictures Resetting Alarm Auxiliary Output Control Auxiliary Output ControlTroubleshooting General SpecificationsNetwork Section Camera SectionOptional Accessories Standard Accessories2003