Preset memories
Calling the settings of the preset memories
1 Set to the preset memory mode.
Press the [TR/PSET] button to turn off its lamp.
2 Press the button among the [1] to [50] buttons of [TRACING/PRESET MEMORY] in which the desired setting was registered.
Erasing preset memory settings
1 Set to the preset memory mode.
Press the [TR/PSET] button to turn off its lamp.
2 Set the memory recording mode.
Press the [M.LOCK] button to turn off its lamp.
3 Hold down the [RESET] button.
The buttons among the [1] to [50] buttons of [TRACING/PRESET MEMORY] whose settings can be erased now start blinking in sequence.
The settings for the buttons whose lamps are off cannot be erased (since they contain tracing memory settings).
4 With the [RESET] button still held down, press the button of the preset memory number whose setting is to be erased.
When the
Up to 10 settings can be registered and called.
The [1] to [10] buttons of [PRESET] correspond to the unit’s preset memories No.1 to No.10.
Registering the settings in the preset memories
1 Display the picture to be shot on the monitor.
Operate the [PAN/TILT] lever and [ZOOM] lever to determine the camera angle.
Adjust the focus and iris if they need to be adjusted.
2 Hold down the [MEMORY] button.
The buttons among the [1] to [10] buttons of [PRESET] in which settings can be registered now start blinking in sequence.
3 With the [MEMORY] button still held down, press the button of the preset memory number in which the setting is to be registered.
Calling the settings of the preset memories
1 Press the button among the [1] to [10] buttons of [PRESET] in which the desired setting was registered.
When the AW-RP400 is connected:
Up to 50 settings can be registered and called.
The [1] to [50] buttons of [PRESET MEMORY] correspond to the unit’s preset memories No.1 to No.50.
Registering the settings in the preset memories
1 Display the picture to be shot on the monitor.
Operate the [PAN/TILT] lever and [ZOOM] lever to determine the camera angle.
Adjust the focus and iris if they need to be adjusted.
2 Hold down the [MEMORY] button.
3 With the [MEMORY] button still held down, press the button of the preset memory number in which the setting is to be registered.
Calling the settings of the preset memories
1 Press the button among the [1] to [50] buttons of [PRESET MEMORY] in which the desired setting was registered.
30