Panasonic AW-HE100N operating instructions Safety precautions, FCC Note

Page 2

Safety precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance.

WARNING:

THIS APPARATUS MUST BE EARTHED

To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring.

Extension cords used with the apparatus must have three cores and be correctly wired to provide connection to the earth. Wrongly wired extension cords are a major cause of fatalities.

The fact that the apparatus operates satisfactorily does not imply that the power point is earthed or that the installation is completely safe. For your safety, if you are in any doubt about the effective earthing of the power point, please consult a qualified electrician.

For CANADA

This class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

WARNING:

TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR/WALL IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

FCC Note:

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Warning:

To assure continued FCC emission limit compliance, the user must use only shielded interface cables when connecting to external units. Also, any unauthorized changes or modifications to this equipment could void the user’s authority to operate it.

CAUTION:

In order to maintain adequate ventilation, do not install or place this unit in a bookcase, built-in cabinet or any other confined space. To prevent risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obstruct the ventilation.

The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable.

A warning that an apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.

indicates safety information.



Image 2
Contents Installation Instructions provided separately Preliminary March Operating InstructionsSafety precautions FCC NoteImportant Safety Instructions Contents Accessories OverviewCharacteristics Multiple number of formats supportedTightening the installation screws Installation precautionsConcerning the installation location Operating precautions Concerning the controller  When connecting the AW-RP655 When connecting the AW-RP400 + AW-IF400 + AW-CB400 Controller supportedRotary head Parts and their functionsCamera unit Green and blinks twiceVideo OUT connector Mounting bracket installed Tally lampL in connector  HD/SD Analog OUT connectorWireless remote control  Focus buttons F N PRESET/LIMIT button Pan-tilt buttons and menu operation buttons       A/FOCUS buttonConcerning the wireless remote control Getting the wireless remote control readySelect the unit to be operated Select the shooting modeBasic shooting operations Set the Operate switch on the controller to on How to turn the power on and offTurning the power on Turning the power off Press the 1, 2, 3, 4 or 5 button When performing the operations Using the controllerSelecting the units Press the 1, 2, 3, 4 or 5 button of ControlSelecting the shooting modes scene files Types of shooting modesExample Halogen mode How to select the shooting modePress the  or  button to make Camera Setting blink Press the  or  buttonPress the OK button Press the jog dial main to make the shooting mode blinkTurn the jog dial main Press the OK button againShooting Menu screen is displayed Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Camera picture is too light or too darkMore advanced operations Manual shooting Manually adjusting the focusWhen the AW-RP400 is connected Manually adjusting the iris Press the Shutter button and turn its lamp on Manually adjusting the shutter speedWhen doing the adjustment Using the controller 100 250 500 1000 2000 Synchro ScanPress the Gain button to turn off its lamp Manually adjusting the gainPress the Gain button and turn on the Manu lamp Press the 0dB, L, M or H Gain button and turn on its lampSet to the memory recording mode Preset memoriesSet to the preset memory mode Display the picture to be shot on the monitorErasing preset memory settings Set the memory recording modeHold down the Reset button White balance adjustment White balance adjustmentPress the SET button for two seconds  Auto tracking white adjustment ATW 3200K and 5600K presets Press the AWC button Manual adjustment Black balance adjustment Black balance adjustmentPress the M/IRIS button Black level total pedestal adjustmentBlack level total pedestal adjustment Press the IRIS- buttonPress the Iris button several times to turn off its lamp  Press the Iris button several times to turn on its lamp Horizontal phase adjustment Genlock adjustmentGenlock adjustment  Color phase adjustment Mode is switched to the camera picture display Basic menu operations Table of operationsMain menu is displayed Press the YES button Press the C button of Option SWPan-tilt head unit setting menu Setting the menu itemsSetting the menu items Main menu Return to the previous menu main menu Return Concerning initializationInitialization Initialize Initialization confirmation screenCamera Setting menu Shooting mode setting menusSharpness setting menu in the user mode is displayed here Picture level adjustment Picture Level -4 to +4 Brightness setting menu User mode brightness setting menu Gain adjustment Gain Auto, 0dB to 12dB, 15dB, 18dBColor setting menu  User mode color setting menuGenlock/color bar setting menu Sharpness setting menu user mode onlyOther settings Other Set menu  Other setting Other Set menu for the user mode Other Set Menu Factory Setting Pan Tilt Head Setting Menu item tableLimiters Resetting the limiters Setting/releasing the limitersSetting the limiters Basic limiter operationsSafe modes Collision-triggered safe modeTrouble-triggered safe mode Concerning the safe modesTroubleshooting  Operation Video Replacing the belt MaintenanceReplacing the consumable parts Appearance Unit inch mmSpecifications FUNCTIONS and Performance Camera unitPan-tilt head unit Memo Page Eastern Zone