Panasonic AW-HE100N operating instructions Color setting menu,  User mode color setting menu

Setting the menu items

Color setting menu

Color setting menu for halogen light mode, fluorescent light mode and daylight mode

	 Color Set 
1	--------Chroma Level	+1
2	--------White Bal	ATW

------ Return

1Color density adjustment [Chroma Level: –3 to +3]

(Factory setting: ±0; +2 for the user mode only)

2White balance selection [White Bal: ATW, AWC A, AWC B, 3200K, 5600K]

(Factory setting: ATW; AWC A for the user mode only) ATW: The white balance is adjusted automatically

and continuously, and it is automatically corrected even when the light source or color temperature has changed.

•If very bright objects (such as fluorescent lights) appear on the screen, the ATW function may not work properly.

•The white balance may shift out of adjustment if there are no white objects on the screen.

AWC A, AWC B:

When AWC A or AWC B is selected and the white balance is adjusted, the resulting status is stored in the memory. When the unit is used under the same conditions, the adjustment status can be reproduced simply by selecting AWC A or AWC B, thus obviating the need for readjustment.

When a new status is stored in the memory, the previous status is erased from the memory.

If AWC (auto white balance adjustment) or a manual white balance adjustment is performed in the status selected by AWC A or AWC B, the resulting status will be stored in the memory.

3200K: The white balance that was adjusted under 3200K lighting conditions (equivalent to a halogen light) is established.

5600K: The white balance that was adjusted under 5600K lighting conditions (equivalent to daylight) is established.

3Return to the previous menu (menu for selecting the shooting mode) [Return]

User mode color setting menu

	 Color Set 
1	--------Chroma Level	+1
2	--------White Bal	ATW
4	--------Pedestal	±0
	Painting
5	----------R Gain	±0
6	----------B Gain	±0
3	------ Return

(User mode only)

4Black level adjustment [Pedestal: –30 to +30]

(Factory setting: ±0)

Using this item, the black level (pedestal level) of the luminance (Y) signal is set.

Align the black level when using a multiple number of cameras including the unit.

5Painting R gain adjustment [R Gain: –30 to +30]

(Factory setting: ±0)

6Painting B gain adjustment [B Gain: –30 to +30]

(Factory setting: ±0)

When “AWC A” or “AWC B” has been selected as the white balance setting (White Bal), the white balance can be finely adjusted after AWC (auto white balance adjustment) has been executed.

When AWC is executed, the setting is returned to ±0.

48