Setting the menu items
Other settings (Other Set) menu
Apart from the gamma correction level selection (Gamma) setting, the settings of the Other Set menu are common to all the shooting modes (halogen light mode, fluorescent light mode, daylight mode and user mode).
(When a setting in one mode is changed, the same setting is established in the other modes.)
Other Set menu for halogen light mode, fluorescent light mode and daylight mode
| Other Set |
|
1 | Auto | |
2 | Auto | |
3 | 1080i | |
4 | ||
5 | Off | |
6 | ||
7 | On | |
8 |
|
1Focus adjustment auto/manual selection [Focus: Auto, Manual]
(Factory setting: Auto)
Auto: The lens is always focused automatically.
Manual: The lens is focused manually.
2Iris adjustment auto/manual selection [Iris: Auto, Manual]
(Factory setting: Auto)
Auto: The iris is always adjusted automatically.
Manual: The iris is adjusted manually.
If “Auto” is selected as the gain adjustment (Gain) setting when the manual setting has been selected for the iris, the iris will be automatically changed to the automatic setting.
If the manual setting is selected for the iris when “Auto” has been selected as the gain adjustment (Gain) setting, the gain adjustment will be automatically changed to the last gain setting.
4Video aspect ratio selection [Aspect: ---, 16:9, 4:3]
(Factory setting: 16:9)
When “480i” or “480psF” has been selected as the “video format (Format) setting”, either “16:9 (squeeze)” or “4:3 (sides cut off)” is selected as the aspect ratio.
When “1080i” or “720p” has been selected as the “video format (Format) setting”,
At this time, the aspect ratio of the composite signals is fixed at “16:9 (squeeze)”.
5AWC/ABC operation status display ON/OFF selection [Status: Off, On]
(Factory setting: Off)
Using this item, the display of the operation status for AWC (auto white balance adjustment) or ABC (auto black balance adjustment) is set to ON or OFF.
When AWC or ABC is executed with this item set to “On”, the following is displayed.
AWC ACTIVE: This is displayed while AWC is being executed.
AWC OK: This is displayed for 3 seconds after AWC was completed successfully.
AWC NG: This is displayed for 3 seconds after AWC was not completed successfully.
ABC ACTIVE: This is displayed while ABC is being executed.
ABC OK: This is displayed for 3 seconds after ABC was completed successfully.
ABC NG: This is displayed for 3 seconds after ABC was not completed successfully.
6Component signal selection [Component: ---, Y/Pb/Pr, Y/C]
(Factory setting: Y/Pb/Pr)
When “480i” or “480psF” has been selected as the “video format (Format) setting”, either “Y/Pb/Pr” or “Y/C” is selected as the component signals.
When “1080i” or “720p” has been selected as the “video format (Format) setting”,
3Video format selection
[Format: 1080i, 720p, 480i, 480psF]
(Factory setting: 1080i)
Even when this item’s setting is changed, the video format is not switched immediately. A screen on which to confirm the setting change appears when an operation involving a transfer to another item has been performed. (Refer to the next page.)
7ON/OFF selection of focus compensation during zooming function
[Focus ADJ With Zoom: On, Off]
(Factory setting: On)
When the focus is set to manual, the subject may go out of focus during zooming.
Select ON or OFF for the function which compensates for this
If the function has been set to OFF, either adjust the focus, as required, after zooming or set the focus to auto.
8Return to the previous menu (menu for selecting the shooting mode) [Return]
50