Panasonic AW-HE100N Multiple color bands color bars are displayed, Menu screen is displayed

Page 23

What to do when encountering problems in the basic shooting operations

If the trouble is not resolved by taking the action suggested below, refer to “Troubleshooting” (page 56).

When performing the operations using the

accessory wireless remote control

The unit does not move.

Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit which is to be operated.

If only one unit is being used, it is normally selected using the [CAM1] button.

If the unit’s status display lamp is off or lights up orange, it means that the unit’s power is not on.

Refer to “How to turn the power on and off” (page 16), and turn on the power.

If the unit’s status display lamp does not blink even when the wireless remote control is operated near the unit’s wireless remote control signal light-sensing area, it means that the wireless remote control’s batteries have run down.

Replace the batteries.

Multiple color bands (color bars) are displayed.

Press the [MODE] button to switch to the camera picture.

When performing the operations

using the controller

The unit does not move.

Select the unit to be operated by following the procedure below.

When the AW-RP655 is connected:

Press the [1], [2], [3], [4] or [5] button of [CONTROL/

PREVIEW MONITOR OUT SEL].

When the AW-RP555 is connected:

Press the [1], [2], [3], [4] or [5] button of [CONTROL].

When the AW-RP400/AW-CB400 is connected: Press the [1], [2], [3], [4] or [5] button of [CONTROL SELECT].

If the [OPERATE] lamp on the controller is off, it means that the power of the controller is not on.

If the unit’s status display lamp is off or lights up orange, it means that the unit’s power is not on. Refer to “How to turn the power on and off” (page 16), and turn on the power.

The menu screen is displayed.

Press the [MENU] button for two seconds to exit the menu.

The lens focus is not adjusted automatically.

Press the [A/FOCUS] button to switch to auto focusing.

The camera picture is too light or too dark.

1.Press the [A/IRIS] button to switch automatically to the lens iris adjustment.

2.Press the [AUTO] button of [GAIN] to switch automatically to the gain adjustment.

Something is wrong with the coloring of the camera pictures.

Refer to “Auto tracking white adjustment (ATW)” (page 32), and switch to “ATW”.

Multiple color bands (color bars) are displayed.

Press the [MODE] button to switch to the camera picture.

The menu screen is displayed.

Press the [MENU] button to exit the menu.

The lens focus is not adjusted automatically.

Press the [EXT(AF)] button to switch to auto focusing.

The camera picture is too light or too dark.

1.Press the [IRIS] button several times to turn on its lamp, and switch the lens iris adjustment to auto.

2.Press the [GAIN] button several times to turn on its lamp, and switch the gain adjustment to auto.

When the AW-RP400 is connected, press the [AGC] button on the AW-CB400.

Something is wrong with the coloring of the camera pictures.

Refer to “Auto tracking white adjustment (ATW)” (page 32), and switch to “ATW”.

23

Image 23
Contents Preliminary March Operating Instructions Installation Instructions provided separatelyFCC Note Safety precautionsImportant Safety Instructions Contents Overview AccessoriesMultiple number of formats supported CharacteristicsTightening the installation screws Installation precautionsConcerning the installation location Operating precautions Controller supported  When connecting the AW-RP655 When connecting the AW-RP400 + AW-IF400 + AW-CB400 Concerning the controllerGreen and blinks twice Parts and their functionsCamera unit Rotary head HD/SD Analog OUT connector Mounting bracket installed Tally lampL in connector Video OUT connectorWireless remote control  A/FOCUS button PRESET/LIMIT button Pan-tilt buttons and menu operation buttons       Focus buttons F NGetting the wireless remote control ready Concerning the wireless remote controlSelect the unit to be operated Select the shooting modeBasic shooting operations Set the Operate switch on the controller to on How to turn the power on and offTurning the power on Turning the power off Press the 1, 2, 3, 4 or 5 button of Control When performing the operations Using the controllerSelecting the units Press the 1, 2, 3, 4 or 5 buttonTypes of shooting modes Selecting the shooting modes scene filesPress the  or  button How to select the shooting modePress the  or  button to make Camera Setting blink Example Halogen modePress the OK button again Press the jog dial main to make the shooting mode blinkTurn the jog dial main Press the OK buttonShooting Camera picture is too light or too dark Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations Manual shooting Manually adjusting the focusWhen the AW-RP400 is connected Manually adjusting the iris 100 250 500 1000 2000 Synchro Scan Manually adjusting the shutter speedWhen doing the adjustment Using the controller Press the Shutter button and turn its lamp onPress the 0dB, L, M or H Gain button and turn on its lamp Manually adjusting the gainPress the Gain button and turn on the Manu lamp Press the Gain button to turn off its lampDisplay the picture to be shot on the monitor Preset memoriesSet to the preset memory mode Set to the memory recording modeErasing preset memory settings Set the memory recording modeHold down the Reset button White balance adjustment White balance adjustmentPress the AWC button  Auto tracking white adjustment ATW 3200K and 5600K presets Press the SET button for two seconds Manual adjustment Black balance adjustment Black balance adjustmentPress the IRIS- button Black level total pedestal adjustmentBlack level total pedestal adjustment Press the M/IRIS button Press the Iris button several times to turn on its lamp Press the Iris button several times to turn off its lamp Horizontal phase adjustment Genlock adjustmentGenlock adjustment  Color phase adjustment Mode is switched to the camera picture display Table of operations Basic menu operationsMain menu is displayed Press the C button of Option SW Press the YES buttonMain menu Setting the menu itemsSetting the menu items Pan-tilt head unit setting menuInitialization confirmation screen Concerning initializationInitialization Initialize  Return to the previous menu main menu ReturnShooting mode setting menus Camera Setting menuSharpness setting menu in the user mode is displayed here Gain adjustment Gain Auto, 0dB to 12dB, 15dB, 18dB Brightness setting menu User mode brightness setting menu Picture level adjustment Picture Level -4 to +4 User mode color setting menu Color setting menuSharpness setting menu user mode only Genlock/color bar setting menuOther settings Other Set menu  Other setting Other Set menu for the user mode Other Set Menu item table Menu Factory Setting Pan Tilt Head SettingLimiters Basic limiter operations Setting/releasing the limitersSetting the limiters Resetting the limitersConcerning the safe modes Collision-triggered safe modeTrouble-triggered safe mode Safe modes Operation Troubleshooting Video Replacing the belt MaintenanceReplacing the consumable parts Unit inch mm AppearanceFUNCTIONS and Performance Camera unit SpecificationsPan-tilt head unit Memo Page Eastern Zone