The sub-menu of the selected item is now displayed. (Some sub-menu items have a sub-menu of their own.)
8 Press the jog dial (main) to make the item to be set or the setting blink.
Each time the jog dial (main) is pressed, the blinking item changes.
When the “Return” is made to blink and the jog dial (main) is turned counterclockwise, operation returns to the previous menu.
9 Turn the jog dial (main) to change the setting.
10 After the setting has been completed, press the [MENU] button or [R/B GAIN/ PED] button.
The menu display is exited.
Turn the jog dial (main) counterclockwise.
7
Each time the jog dial (main) is pressed, the blinking item changes.
The main menu is displayed on the monitor.
Press the [OK] button again.
5
6 Press the jog dial (main) to make the item to be selected blink.
Press the [OK] button.
Display “OPEN CAMERA MENU? OK Key” on the LCD panel.
4
The display on the LCD panel of the AW-RP655 is set to the menu mode.
3 Turn the jog dial (main) and display “CAMERA SETTING” on the LCD panel.
Press the [MENU] button.
2
When performing the operations using the controller AW-RP655
1 Press one of the [1] to [5] buttons of
[CONTROL/PREVIEW MONITOR OUT SEL] to select the unit which is to be operated.
Basic menu operations
When performing the operations using the
accessory wireless remote control
1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit which is to be operated.
Press the [MENU] button for two seconds.
The main menu is displayed.
Press the [] or [] button to make the item to be selected blink.
Each time the [] or [] button is pressed, the blinking item changes.
4 Press the [] or [] button.
The sub-menu of the selected item is displayed. (Some sub-menu items have a sub-menu of their own.)
5 Press the [] or [] button to make the item to be set or the setting blink.
Each time the [] or [] button is pressed, the blinking item changes.
When “Return” is made to blink and the [] or [] button is pressed, operation returns to the previous menu.
While the menus are displayed, the [] and [] button have the same functions.
Bear in mind, however, that if the [] button is pressed when it is possible to change a value, the value will be changed by the button.
6 Press the [] or [] button to change the setting.
7 After the setting has been completed, press the [MENU] button for two seconds.
The menu display is exited.
