Panasonic AW-HE100N operating instructions Specifications, FUNCTIONS and Performance Camera unit

Page 60

Specifications

Power supply: AC 100 V to 240 V, 50/60 Hz

Power consumption: Approx. 40 W

GENERAL

indicates safety information.

Operating temperature:

32 °F to 104

°F (0 °C to +40 °C)

Storage temperature:

–4 °F to 122

°F (–20 °C to +50 °C)

Allowable humidity ranges:

Less than 85 % (no condensation)

Weight:

Approx. 16.5 lbs. (7.5 kg)

Dimensions (W D H):

9-3/8˝ 10-1/8˝ 13-1/2˝ (238 257 343.5 mm) [excluding protrusions]

Finish:

Light silver matte finish

Controller supported: AW-RP655, AW-RP555, AW-RP400, AW-IF400, AW-CB400

It may be necessary to upgrade the version of the controller so that the controller will support the unit.

INPUT

Input connector:

AC 100 V to 240 V (50/60 Hz),

 

G/L IN (BNC)

 

BBS or VBS signal supported

OUTPUT

Output connector:

Composite: 1.0 Vp-p/75 (BNC 1),

 

HD/SD analog component or SD Y/C signals (VGA 15P 1)

 

Y/C signals available in SD mode only; switching with Y/Pb/Pr signals possible

 

using menu setting

 

SD/HD selection possible when Y/Pb/Pr signals are output.

INPUT/OUTPUT

Input/Output connector:

CONTROL IN RS422A (RJ-45)

FUNCTIONS AND PERFORMANCE [Camera unit]

Imaging sensors:

1/3˝ CCD imaging sensors 3 (inter-line type, progressive system supported)

Lens:

Motorized 13zoom, f/1.6 to 2.8

 

(f=4.2 to 55 mm; 35 mm equivalent: 32.5 mm to 423 mm)

Focus:

Switching between auto and manual

Color separation optical system: Prism system

Gain selection:

0 to 12 dB in step, 15 dB,

 

18 dB, AGC (iris always operated automatically at the AGC ON setting)

Electronic shutter speed:

1/100, 1/250, 1/500, 1/1000, 1/2000 sec.,

 

Synchro scan (60.04 to 248.82 Hz)

Gamma:

Low, Normal, High

60

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Installation Instructions provided separately Preliminary March Operating InstructionsSafety precautions FCC NoteImportant Safety Instructions Contents Accessories OverviewCharacteristics Multiple number of formats supportedInstallation precautions Concerning the installation locationTightening the installation screws Operating precautions  When connecting the AW-RP655  When connecting the AW-RP400 + AW-IF400 + AW-CB400Concerning the controller Controller supportedParts and their functions Camera unitRotary head Green and blinks twiceMounting bracket installed Tally lamp L in connectorVideo OUT connector  HD/SD Analog OUT connectorWireless remote control PRESET/LIMIT button  Pan-tilt buttons and menu operation buttons      Focus buttons F N  A/FOCUS buttonConcerning the wireless remote control Getting the wireless remote control readySelect the shooting mode Basic shooting operationsSelect the unit to be operated How to turn the power on and off Turning the power onSet the Operate switch on the controller to on Turning the power off When performing the operations Using the controller Selecting the unitsPress the 1, 2, 3, 4 or 5 button Press the 1, 2, 3, 4 or 5 button of ControlSelecting the shooting modes scene files Types of shooting modesHow to select the shooting mode Press the  or  button to make Camera Setting blinkExample Halogen mode Press the  or  buttonPress the jog dial main to make the shooting mode blink Turn the jog dial mainPress the OK button Press the OK button againShooting Lens focus is not adjusted automatically Multiple color bands color bars are displayedMenu screen is displayed Camera picture is too light or too darkMore advanced operations Manually adjusting the focus When the AW-RP400 is connectedManual shooting Manually adjusting the iris Manually adjusting the shutter speed When doing the adjustment Using the controllerPress the Shutter button and turn its lamp on 100 250 500 1000 2000 Synchro ScanManually adjusting the gain Press the Gain button and turn on the Manu lampPress the Gain button to turn off its lamp Press the 0dB, L, M or H Gain button and turn on its lampPreset memories Set to the preset memory modeSet to the memory recording mode Display the picture to be shot on the monitorSet the memory recording mode Hold down the Reset buttonErasing preset memory settings White balance adjustment White balance adjustment Auto tracking white adjustment ATW  3200K and 5600K presetsPress the SET button for two seconds Press the AWC button Manual adjustment Black balance adjustment Black balance adjustmentBlack level total pedestal adjustment Black level total pedestal adjustmentPress the M/IRIS button Press the IRIS- buttonPress the Iris button several times to turn off its lamp  Press the Iris button several times to turn on its lampGenlock adjustment Genlock adjustment Horizontal phase adjustment  Color phase adjustment Mode is switched to the camera picture display Basic menu operations Table of operationsMain menu is displayed Press the YES button Press the C button of Option SWSetting the menu items Setting the menu itemsPan-tilt head unit setting menu Main menuConcerning initialization Initialization Initialize Return to the previous menu main menu Return Initialization confirmation screenCamera Setting menu Shooting mode setting menusSharpness setting menu in the user mode is displayed here Brightness setting menu  User mode brightness setting menuPicture level adjustment Picture Level -4 to +4 Gain adjustment Gain Auto, 0dB to 12dB, 15dB, 18dBColor setting menu  User mode color setting menuGenlock/color bar setting menu Sharpness setting menu user mode onlyOther settings Other Set menu  Other setting Other Set menu for the user mode Other Set Menu Factory Setting Pan Tilt Head Setting Menu item tableLimiters Setting/releasing the limiters Setting the limitersResetting the limiters Basic limiter operationsCollision-triggered safe mode Trouble-triggered safe modeSafe modes Concerning the safe modesTroubleshooting  Operation Video Maintenance Replacing the consumable partsReplacing the belt Appearance Unit inch mmSpecifications FUNCTIONS and Performance Camera unitPan-tilt head unit Memo Page Eastern Zone
Top Page Image Contents