Panasonic AW-HE100N operating instructions Characteristics, Multiple number of formats supported

Page 6

Characteristics

Multiple number of formats supported

Switching between the 1080i, 720p and 480i formats can be accomplished using a menu. Transition from an SD format system to an HD format system can also be carried out smoothly.

With the SD format, either 16:9 or 4:3 can be selected as the aspect ratio.

Three 1/3” CCD imaging sensors and a high-performance 13zoom lens featured

The unit incorporates a 14-bit analog-to-digital (A/D) converter and a 19-bit processing DSP (digital signal processor). High-quality pictures are obtained by video processing in many different kinds of ways.

The unit comes with wide progressive CCD imaging sensors which have been newly developed.

These 1/3˝ CCD sensors have a large light-sensing surface area so that pictures with a high quality can be obtained under a variety of different shooting conditions.

The large-diameter lens that was developed for shooting HD pictures has a wide angle of 32.5 mm (35 mm equivalent) at the WIDE setting. Clear pictures are obtained under a wide range of applications.

Easy operation of unit enabled by its integration with a high-performance pan-tilt head unit

Operations at the high speed of 60°/s

Wide rotational angles with a panning range of more than ±175° and a tilting range from –40° to +210° or more

Standstill accuracy: Accurate response of max. 3´ (0.05°)

Quiet operation with noise levels of NC30 (for operations at 30°/s) and NC35 (for operations at 60°/s)

Storage of up to 100 positions in the preset memory

(The number of preset memory settings differs depending on the controller that is used with the unit.)

High degree of compatibility with Panasonic’s currently available controllers, enabling a flexible system to be put together

Up to five units and devices can be operated using a controller (AW-RP655, AW-RP555 or AW-RP400 + AW-IF400 + AWCB400) currently available from Panasonic. (It may be necessary to upgrade the version of the controller in order to support the unit. The maximum distances between the units and controller is 3280 ft. (1000 meters). Use of an external device or some other means must be provided separately in order to extend the video signal connections.)

The unit can also be used together with the cameras and pan-tilt head unit systems currently available from Panasonic so that an existing system can be used to advantage to put together a system that is even more flexible.

Integrated pan-tilt head unit, camera and lens to facilitate installation

Integrating the pan-tilt head unit, camera and lens has significantly reduced the processes involving in installation.

Easy-to-operate wireless remote control provided as a standard accessory

A wireless remote control capable of operating up to four units is provided as a standard accessory.

It can easily be used to set the various functions or switch between them while viewing the menu screens.

Image 6
Contents Installation Instructions provided separately Preliminary March Operating InstructionsSafety precautions FCC Note Important Safety Instructions Contents Accessories OverviewCharacteristics Multiple number of formats supportedInstallation precautions Concerning the installation locationTightening the installation screws Operating precautions Concerning the controller  When connecting the AW-RP655 When connecting the AW-RP400 + AW-IF400 + AW-CB400 Controller supportedRotary head Parts and their functionsCamera unit Green and blinks twiceVideo OUT connector Mounting bracket installed Tally lampL in connector  HD/SD Analog OUT connectorWireless remote control  Focus buttons F N PRESET/LIMIT button Pan-tilt buttons and menu operation buttons       A/FOCUS buttonConcerning the wireless remote control Getting the wireless remote control readySelect the shooting mode Basic shooting operationsSelect the unit to be operated How to turn the power on and off Turning the power onSet the Operate switch on the controller to on Turning the power off Press the 1, 2, 3, 4 or 5 button When performing the operations Using the controllerSelecting the units Press the 1, 2, 3, 4 or 5 button of ControlSelecting the shooting modes scene files Types of shooting modesExample Halogen mode How to select the shooting modePress the  or  button to make Camera Setting blink Press the  or  buttonPress the OK button Press the jog dial main to make the shooting mode blinkTurn the jog dial main Press the OK button againShooting Menu screen is displayed Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Camera picture is too light or too darkMore advanced operations Manually adjusting the focus When the AW-RP400 is connectedManual shooting Manually adjusting the iris Press the Shutter button and turn its lamp on Manually adjusting the shutter speedWhen doing the adjustment Using the controller 100 250 500 1000 2000 Synchro ScanPress the Gain button to turn off its lamp Manually adjusting the gainPress the Gain button and turn on the Manu lamp Press the 0dB, L, M or H Gain button and turn on its lampSet to the memory recording mode Preset memoriesSet to the preset memory mode Display the picture to be shot on the monitorSet the memory recording mode Hold down the Reset buttonErasing preset memory settings White balance adjustment White balance adjustmentPress the SET button for two seconds  Auto tracking white adjustment ATW 3200K and 5600K presets Press the AWC button Manual adjustment Black balance adjustment Black balance adjustmentPress the M/IRIS button Black level total pedestal adjustmentBlack level total pedestal adjustment Press the IRIS- buttonPress the Iris button several times to turn off its lamp  Press the Iris button several times to turn on its lampGenlock adjustment Genlock adjustment Horizontal phase adjustment  Color phase adjustment Mode is switched to the camera picture display Basic menu operations Table of operationsMain menu is displayed Press the YES button Press the C button of Option SWPan-tilt head unit setting menu Setting the menu itemsSetting the menu items Main menu Return to the previous menu main menu Return Concerning initializationInitialization Initialize Initialization confirmation screenCamera Setting menu Shooting mode setting menusSharpness setting menu in the user mode is displayed here Picture level adjustment Picture Level -4 to +4 Brightness setting menu User mode brightness setting menu Gain adjustment Gain Auto, 0dB to 12dB, 15dB, 18dBColor setting menu  User mode color setting menuGenlock/color bar setting menu Sharpness setting menu user mode onlyOther settings Other Set menu  Other setting Other Set menu for the user mode Other Set Menu Factory Setting Pan Tilt Head Setting Menu item tableLimiters Resetting the limiters Setting/releasing the limitersSetting the limiters Basic limiter operationsSafe modes Collision-triggered safe modeTrouble-triggered safe mode Concerning the safe modesTroubleshooting  Operation Video Maintenance Replacing the consumable partsReplacing the belt Appearance Unit inch mmSpecifications FUNCTIONS and Performance Camera unitPan-tilt head unit Memo Page Eastern Zone