Panasonic AW-HE100N Brightness setting menu,  User mode brightness setting menu

Page 47

Setting the menu items

Brightness setting menu

Brightness setting menu for halogen light mode, fluorescent light mode and daylight mode

 

 Brightness Set 

 

1

--------Picture Level

+1

2

--------Step

1/100

3

--------Gain

Auto

4

--------AGC Max Gain

18dB

5------ Return

1Picture level adjustment [Picture Level: –4 to +4]

(Factory setting: ±0]

The convergence level of the auto iris/auto gain increase is adjusted here.

2Shutter step selection

[Step: Off, 1/100, 1/250, 1/500, 1/1000, 1/2000]

(Factory setting: Off)

Using this item, the shutter speed is selected (unit: sec.). Off: The electronic shutter is set to OFF.

When the 1/100 speed setting is used in areas where the power line frequency is 50 Hz, flicker caused by fluorescent lights becomes more noticeable.

3Gain adjustment

[Gain: Auto, 0dB to 12dB, 15dB, 18dB]

(Factory setting: Auto; 0dB for the user mode only) Using this item, the light quantity is adjusted.

Auto: The light quantity is adjusted automatically. (AGC: Auto Gain Control)

The maximum gain is adjusted using the AGC maximum gain selection “AGC Max Gain” item.

If “Auto” is selected as the gain adjustment (Gain) setting when the manual setting has been selected for the iris, the iris will be automatically changed to the automatic setting.

If the manual setting is selected for the iris when “Auto” has been selected as the gain adjustment (Gain) setting, the gain adjustment will be automatically changed to the last gain setting.

4AGC maximum gain selection

[AGC Max Gain: 6dB, 12dB, 18dB, ---]

(Factory setting: 18dB)

Using this item, the maximum gain when “Auto” has been selected as the gain adjustment (Gain) setting is set.

5Return to the previous menu (menu for selecting the shooting mode) [Return]

User mode brightness setting menu

 

 Brightness Set 

 

1

--------Picture Level

+1

6

--------Shutter Mode

Synchro

7

--------Step/Synchro

60.04Hz

3

--------Gain

Auto

4

----------AGC Max Gain

18dB

5

------ Return

 

(User mode only)

6Shutter mode selection [Shutter Mode: Step, Synchro]

(Factory setting: Step)

The camera operates at the shutter speed setting selected using the Shutter step/synchro scan setting (Step/Synchro) item.

Step: The shutter speed is selected using the shutter step value.

Synchro: The synchro scanning frequency is set.

7Shutter step/synchro scan setting [Step/Synchro: Off, 1/100, 1/250, 1/500, 1/1000, 1/2000 or 60.04Hz to 248.82Hz]

(Factory setting: Off, 60.04 Hz)

Using this item, the shutter speed is set.

When “Step” has been selected as the shutter mode selection (Shutter Mode) setting, then Off, 1/100 sec., 1/250 sec., 1/500 sec., 1/1000 sec. or 1/2000 is selected as the shutter speed.

Off: The electronic shutter is set to OFF.

When the 1/100 speed setting is used in areas where the power line frequency is 50 Hz, flicker caused by fluorescent lights becomes more noticeable.

When “Synchro” has been selected as the shutter mode selection (Shutter Mode) setting, a scanning frequency ranging from 60.04 Hz to 248.82 Hz is set.

When shooting subjects such as TV screens, the horizontal bar noise can be reduced by adjusting the synchro scanning frequency.

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Preliminary March Operating Instructions Installation Instructions provided separatelyFCC Note Safety precautionsImportant Safety Instructions Contents Overview AccessoriesMultiple number of formats supported CharacteristicsTightening the installation screws Installation precautionsConcerning the installation location Operating precautions Controller supported  When connecting the AW-RP655 When connecting the AW-RP400 + AW-IF400 + AW-CB400 Concerning the controllerGreen and blinks twice Parts and their functionsCamera unit Rotary head HD/SD Analog OUT connector Mounting bracket installed Tally lampL in connector Video OUT connectorWireless remote control  A/FOCUS button PRESET/LIMIT button Pan-tilt buttons and menu operation buttons       Focus buttons F NGetting the wireless remote control ready Concerning the wireless remote controlSelect the unit to be operated Select the shooting modeBasic shooting operations Set the Operate switch on the controller to on How to turn the power on and offTurning the power on Turning the power off Press the 1, 2, 3, 4 or 5 button of Control When performing the operations Using the controllerSelecting the units Press the 1, 2, 3, 4 or 5 buttonTypes of shooting modes Selecting the shooting modes scene filesPress the  or  button How to select the shooting modePress the  or  button to make Camera Setting blink Example Halogen modePress the OK button again Press the jog dial main to make the shooting mode blinkTurn the jog dial main Press the OK buttonShooting Camera picture is too light or too dark Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations Manual shooting Manually adjusting the focusWhen the AW-RP400 is connected Manually adjusting the iris 100 250 500 1000 2000 Synchro Scan Manually adjusting the shutter speedWhen doing the adjustment Using the controller Press the Shutter button and turn its lamp onPress the 0dB, L, M or H Gain button and turn on its lamp Manually adjusting the gainPress the Gain button and turn on the Manu lamp Press the Gain button to turn off its lampDisplay the picture to be shot on the monitor Preset memoriesSet to the preset memory mode Set to the memory recording modeErasing preset memory settings Set the memory recording modeHold down the Reset button White balance adjustment White balance adjustmentPress the AWC button  Auto tracking white adjustment ATW 3200K and 5600K presets Press the SET button for two seconds Manual adjustment Black balance adjustment Black balance adjustmentPress the IRIS- button Black level total pedestal adjustmentBlack level total pedestal adjustment Press the M/IRIS button Press the Iris button several times to turn on its lamp Press the Iris button several times to turn off its lamp Horizontal phase adjustment Genlock adjustmentGenlock adjustment  Color phase adjustment Mode is switched to the camera picture display Table of operations Basic menu operationsMain menu is displayed Press the C button of Option SW Press the YES buttonMain menu Setting the menu itemsSetting the menu items Pan-tilt head unit setting menuInitialization confirmation screen Concerning initializationInitialization Initialize  Return to the previous menu main menu ReturnShooting mode setting menus Camera Setting menuSharpness setting menu in the user mode is displayed here Gain adjustment Gain Auto, 0dB to 12dB, 15dB, 18dB Brightness setting menu User mode brightness setting menu Picture level adjustment Picture Level -4 to +4 User mode color setting menu Color setting menuSharpness setting menu user mode only Genlock/color bar setting menuOther settings Other Set menu  Other setting Other Set menu for the user mode Other Set Menu item table Menu Factory Setting Pan Tilt Head SettingLimiters Basic limiter operations Setting/releasing the limitersSetting the limiters Resetting the limitersConcerning the safe modes Collision-triggered safe modeTrouble-triggered safe mode Safe modes Operation Troubleshooting Video Replacing the belt MaintenanceReplacing the consumable parts Unit inch mm AppearanceFUNCTIONS and Performance Camera unit SpecificationsPan-tilt head unit Memo Page Eastern Zone
Top Page Image Contents