Panasonic WV-SW598 installation instructions LAN cable category 5e or better, straight

Connecting to a network using a PoE+ hub when the temperature is –30 °C {–22 °F} or less

*When connecting to a network using a PoE+ hub when the temperature is –30 °C {–22 °F} or less, use a 24 V AC power supply or a tested PoE injector.

	Hub, router
	Video monitor
Powered speaker	(for adjustment use only)
	RJ-45 female connector
	(cable coupler)
	LAN cable (category 5e or	LAN cable (category 5e or
		better, straight)
	better, straight)
		PC
	Power supply
	(24 V AC)
Plug-in power type
microphone
		Tested PoE injector
	LAN cable (category 5e or
Powered speaker	better, straight)
	RJ-45 female connector	Video monitor
	(cable coupler)

Plug-in power type microphone

IMPORTANT:

(for adjustment use only)

Recommended total extended cable length*

<Required cable>

LAN cable (category 5e or better, straight)

*Recommended cable length from the speaker: less than 10 m {32.8 feet}

Recommended cable length from the microphone: less than 1 m {3.28 feet}

•The video monitor is used for checking the adjustment of the angular field of view when installing the camera or when servicing. It is not provided for recording/monitoring use.

•Depending on the monitor, some characters (camera title, preset ID, etc.) may not be displayed on the screen.

•Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX or better. (When supplying the power to a hub or router, apply PoE+ (IEEE802.3at compliant).) It is impossible to supply the power to this product from a PoE hub or router that is compliant with IEEE802.3af standard.

•If a PoE+ hub is not used, each network camera must be connected to a power supply.

•When using 24 V AC, power supply from a PoE+ hub or router is not required.

30