Panasonic WV-SW598 installation instructions How to remove the SD memory card

Step 5

Align “g” of the water-resistant cap to “OPEN h” of the camera. Then, turn the water-resistant cap toward “h LOCK” until the water-resistant cap is secured to the cam- era.

Step 6

Secure the water-resistant cap with the locking screw. (Recommended tightening torque: 0.69 N·m {0.51 lbf·ft})

Locking screw

Water-resistant cap

Step 7

First, insert the tab on the bottom of the main sunshield rear cover into the main body, and then push the tab on the top of the main sunshield rear cover into the main body until a click is heard.

Main sunshield rear cover

Step 8

Turn on the power of the camera, and select “Use” for “SD memory card” on the [SD memory card] tab of the “Basic” page on the setup menu. (☞ Operating Instructions (included in the CD-ROM))

Step 9

Format the SD memory card by clicking the [Execute] button of “Format” on the [SD memory card] tab of the “Basic” page on the setup menu. (☞ Operating Instructions (included in the CD-ROM))

How to remove the SD memory card

IMPORTANT:

•Before removing the SD memory card, make sure to select “Not use” for “SD memory card” on the [SD memory card] tab of “Basic” page on the setup menu first.

(☞ Operating Instructions (included in the CD-ROM))

Step 1 Step 3

Remove the water-resistant cap by following steps 1 - 3 of the “How to insert an SD memory card” section (☞ page 18).

Return the parts to the original state by following steps 5 - 7 of the “How to insert an SD memory card” section (☞ page 19).

Step 2

Push the SD memory card to release the lock. The SD memory card will come up from the slot.

19