Panasonic WV-SW598 installation instructions Major operating controls, Main body

Page 15

Major operating controls

<Main body>

	Power cable Brown	To the power supply (24 V AC, 50 Hz/60 Hz)
	Blue
		GND
	Green

External I/O cable

Microphone input cable (connector: white)

Audio output cable (connector: black)

Network cable with cable coupler

Output cable for the monitor used for adjustment

Safety wire

Attachment pipe

Housing base (inside)

Front sunshield (accessory)

Rear sunshield (accessory)

Main sunshield rear cover

(Attached at the time of shipment from the factory)

Main sunshield

(Attached at the time of shipment from the factory)

Dome cover

* Do not detach.

Image 15

Contents Cs0313-1043 PGQX1224YACan ICES-3A/NMB-3A Contents Important safety instructions Disclaimer of warranty Limitation of liabilityPreface Main functions System requirements for a PC CPUIntel CoreTM 2 Duo 2.4 GHz or faster recommended Trademarks and registered trademarks CopyrightNetwork security Precautions This product has no power switch Do not damage the power cableCorrectly perform all wiring Turn the power off when cleaning this productCode label Periodically images on the screen appear to be dis- tortedWhat to do if Warming UP-PLEASE Wait appears on the display About SD memory card Tilt angles and the zoom ratio Position refreshPrecautions for installation Take notice of humidity Check before installationPoE+ Power over Ethernet Plus Time & date settingMain body Major operating controlsOFF šON Turn off the power of the camera Initialize the cameraStep Remove the locking screw of the water-resistant cap How to insert an SD memory cardWhen inserting an SD memory card, make sure the direction Insert/remove an SD memory cardHow to remove the SD memory card Power Source IEC/EN/UL/CSA Installations/ConnectionsHow to detach the housing base When using the mount bracket custom-made InstallationInstall the mounting bracket When using the wall mount bracket WV-Q122 optionPlate spring Projection Dents Wire Detach the hooks Front/rear sunshields xing screw Connection 8P alarm cable connectorOutput cable for the monitor used for adjustment AC power supply connector kit accessoryRecommended specification of cable wire How to assemble the 24 V AC power supply con- nector kitAudio output cable External I/O cableRatings Microphone/line input cableConnection example Required cableLAN cable category 5e or better, cross LAN cable category 5e or better, straight Configuring the camera so that it can be accessed from a PC Configure the network settingsPage Troubleshooting Power cable, plug Live indicator keeps onLive indicator lights red Power cable insulation is DamagedIt is hard to see images with About the live indicatorCamera when there are Operation status Indicator statusTerminal 1, Terminal 2, and Terminal SpecificationsAlarm in 1 BLACK/WHITE IN/ Alarm in 2 Alarm OUT Alarm in 3 AUX OUT x1 eachATW1/ ATW2/ AWC LensMLD, ICMP, ARP Jpeg MjpegBB-HCA8CE Standard accessoriesOptional accessories BB-HCA8APage Page Page Page Page Page Http//panasonic.net For business users in the European UnionFor U.S. and CanadaFor Europe and other countries Panasonic Corporation

Major operating controls

<Main body>

GND