Panasonic WV-SW598 Insert/remove an SD memory card, How to insert an SD memory card

Page 18

Insert/remove an SD memory card

How to insert an SD memory card

IMPORTANT:

• When inserting an SD memory card, make sure the direction.

Step 1

Step 3

Pull out the main sunshield rear cover on the rear of the camera by pressing the tab on the top of the sunshield.

Main sunshield rear cover

Step 2

Remove the locking screw of the water-resistant cap.

Locking screw

Turn the water-resistant cap to the “OPEN” side, and pull out the cap.

Step 4

Insert an SD memory card into the SD memory card slot. Push the memory card straight into the slot until a click is heard.

START

SD memory card slot

INITIAL	SET
OFF ON	LINK ACT
	SD

Water-resistant cap

Image 18

Contents PGQX1224YA Cs0313-1043Can ICES-3A/NMB-3A Contents Important safety instructions Disclaimer of warranty Limitation of liabilityPreface Main functions System requirements for a PC CPUIntel CoreTM 2 Duo 2.4 GHz or faster recommended Trademarks and registered trademarks CopyrightNetwork security Precautions Turn the power off when cleaning this product Do not damage the power cableCorrectly perform all wiring This product has no power switchAbout SD memory card Periodically images on the screen appear to be dis- tortedWhat to do if Warming UP-PLEASE Wait appears on the display Code labelPosition refresh Tilt angles and the zoom ratioPrecautions for installation Time & date setting Check before installationPoE+ Power over Ethernet Plus Take notice of humidityMajor operating controls Main bodyOFF šON Turn off the power of the camera Initialize the cameraStep Insert/remove an SD memory card How to insert an SD memory cardWhen inserting an SD memory card, make sure the direction Remove the locking screw of the water-resistant capHow to remove the SD memory card Installations/Connections Power Source IEC/EN/UL/CSAHow to detach the housing base When using the wall mount bracket WV-Q122 option InstallationInstall the mounting bracket When using the mount bracket custom-madePlate spring Projection Dents Wire Detach the hooks Front/rear sunshields xing screw 8P alarm cable connector ConnectionHow to assemble the 24 V AC power supply con- nector kit AC power supply connector kit accessoryRecommended specification of cable wire Output cable for the monitor used for adjustmentMicrophone/line input cable External I/O cableRatings Audio output cableConnection example Required cableLAN cable category 5e or better, cross LAN cable category 5e or better, straight Configure the network settings Configuring the camera so that it can be accessed from a PCPage Troubleshooting Power cable insulation is Damaged Live indicator keeps onLive indicator lights red Power cable, plugOperation status Indicator status About the live indicatorCamera when there are It is hard to see images withAlarm in 3 AUX OUT x1 each SpecificationsAlarm in 1 BLACK/WHITE IN/ Alarm in 2 Alarm OUT Terminal 1, Terminal 2, and TerminalLens ATW1/ ATW2/ AWCJpeg Mjpeg MLD, ICMP, ARPBB-HCA8A Standard accessoriesOptional accessories BB-HCA8CEPage Page Page Page Page Page Panasonic Corporation For business users in the European UnionFor U.S. and CanadaFor Europe and other countries Http//panasonic.net