Symptom | Cause/solution | Reference | |
pages | |||
|
| ||
|
|
| |
It is hard to see images with | The effectiveness of the rain wash coating may have been |
| |
reduced. Refer to “Cleaning this product body” in “Precautions for |
| ||
the camera when there are | 10 | ||
use” and clean the dome cover. If the situation does not improve | |||
raindrops on the dome cover. |
| ||
contact your dealer. |
| ||
|
| ||
|
|
|
About the live indicator
The live indicator will light or blink as follows depending on the camera status.
Operation status |
| Indicator status |
|
|
|
When the power is turned on | Before the network | Lights orange → Lights off → Blinks orange |
| connection is established | → Lights orange |
|
|
|
| When the network | Lights orange → Lights off → Blinks orange |
| connection is established | → Blinks green → Lights green |
|
|
|
During the standby or connection (Cable is not connected.) | Lights orange | |
|
| |
During the standby or connection (Cable is connected.) | Lights green | |
|
|
|
During the upgrade process |
| Blinks orange |
|
|
|
During the initialization |
| Lights orange → Lights off → Blinks orange |
|
| → Lights orange |
|
| |
Port forwarding error caused by the UPnP function | Blinks orange (in 2 seconds intervals (on for 1 second / | |
|
| off for 1 second)) |
|
|
|
Trouble happening on the camera |
| Blinks red |
|
| |
Failure in writing data on the SD memory card | Lights red | |
|
|
|
35