Panasonic WV-SW598 installation instructions Jpeg Mjpeg, Mld, Icmp, Arp

Page 38

• Network

Network:

10BASE-T/100BASE-TX, RJ-45 connector

Resolution:

• Image capture mode: 2 mega pixel [16:9]

 

H.264

1920x1080/640x360/320x180, max. 30 fps

 

JPEG (MJPEG)

1920x1080/640x360/320x180, max. 30 fps

 

• Image capture mode: 1.3 mega pixel [16:9]

 

H.264

1280x720/640x360/320x180, max. 30 fps

 

JPEG (MJPEG)

1280x720/640x360/320x180, max. 30 fps

 

• Image capture mode: 1.3 mega pixel [4:3]

 

H.264

1280x960/VGA/QVGA, max. 30 fps

 

JPEG (MJPEG)

1280x960/VGA/QVGA, max. 30 fps

Image compression method:

H.264*1

 

 

Image quality: Low/ Normal/ Fine

 

Transmission type: Unicast/Multicast

 

Video bit rate:

 

 

(Constant bit rate/Best effort/Advanced VBR)

 

64 kbps/ 128 kbps/ 256 kbps/ 384 kbps/ 512 kbps/ 768 kbps/ 1024 kbps/

 

1536 kbps/ 2048 kbps/ 3072 kbps/ 4096 kbps/ 6144 kbps/ 8192 kbps/

 

10240 kbps/ 12288 kbps/ 14336 kbps

 

(Frame rate)

 

 

1 fps/ 3 fps/ 5 fps/ 7.5 fps/ 10 fps/ 12 fps/ 15 fps/ 20 fps/ 30 fps

 

JPEG (MJPEG)

 

 

Image quality:

 

 

0 SUPER FINE/ 1 FINE/ 2/ 3/ 4/ 5 NORMAL/ 6/ 7/ 8/

 

9 LOW (10 steps: 0-9)

 

 

Transmission type: PULL/PUSH

Transmission interval:

0.1 fps - 30 fps (JPEG frame rate will be restricted when displaying both JPEG and

 

H.264 images.)

 

Audio compression method:

G.726 (ADPCM) 32 kbps/ 16 kbps, G.711 64 kbps, AAC*2

Bandwidth control:

Unlimited/ 64 kbps/ 128 kbps/ 256 kbps/ 384 kbps/ 512 kbps/ 768 kbps/

 

1024 kbps/ 2048 kbps/ 4096 kbps/ 8192 kbps

Protocol:

IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, RTP,

 

MLD, ICMP, ARP

 

 

IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP,

 

DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP

OS*3 *4:

Microsoft Windows 8

 

 

Microsoft Windows 7

 

 

Microsoft Windows Vista

 

Microsoft Windows XP SP3

Browser:

Windows Internet Explorer 10.0 (32-bit)

 

Windows Internet Explorer 9.0 (32-bit)

 

Windows Internet Explorer 8.0 (32-bit)

 

Windows Internet Explorer 7.0 (32-bit)

Maximum concurrent

14 (Number of sessions that can connect to cameras at the same time)

access number:

* Depends on network conditions

FTP client:

Alarm image transmission, FTP periodic transmission (When the FTP transmission is

 

failed, backup on an optional SD memory card is available.)

Multi-screen:

Up to 16 camera images can be displayed simultaneously on a multi-screen.

 

(Including the camera itself)

 

 

Compatible SDXC/SDHC/

Manufactured by Panasonic (SD speed class 4 or higher)

SD memory card:

SDXC memory card: 64 GB

 

SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB

 

SD memory card: 2 GB (except miniSD card and microSD card)

Cellular phone compatibility:

JPEG image, panning/tilting/zoom/focus control, AUX control (by access level)

Mobile terminal compatibility:

iPad, iPhone, iPod touch (iOS 4.2.1 or later)

(As of February, 2013)*5

AndroidTM mobile terminals

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents PGQX1224YA Cs0313-1043Can ICES-3A/NMB-3A Contents Important safety instructions Preface Disclaimer of warrantyLimitation of liability Main functions Intel CoreTM 2 Duo 2.4 GHz or faster recommended System requirements for a PCCPU Network security Trademarks and registered trademarksCopyright Precautions Turn the power off when cleaning this product Do not damage the power cableCorrectly perform all wiring This product has no power switchAbout SD memory card Periodically images on the screen appear to be dis- tortedWhat to do if Warming UP-PLEASE Wait appears on the display Code labelPosition refresh Tilt angles and the zoom ratioPrecautions for installation Time & date setting Check before installationPoE+ Power over Ethernet Plus Take notice of humidityMajor operating controls Main bodyOFF šON Step Turn off the power of the cameraInitialize the camera Insert/remove an SD memory card How to insert an SD memory cardWhen inserting an SD memory card, make sure the direction Remove the locking screw of the water-resistant capHow to remove the SD memory card Installations/Connections Power Source IEC/EN/UL/CSAHow to detach the housing base When using the wall mount bracket WV-Q122 option InstallationInstall the mounting bracket When using the mount bracket custom-madePlate spring Projection Dents Wire Detach the hooks Front/rear sunshields xing screw 8P alarm cable connector ConnectionHow to assemble the 24 V AC power supply con- nector kit AC power supply connector kit accessoryRecommended specification of cable wire Output cable for the monitor used for adjustmentMicrophone/line input cable External I/O cableRatings Audio output cableLAN cable category 5e or better, cross Connection exampleRequired cable LAN cable category 5e or better, straight Configure the network settings Configuring the camera so that it can be accessed from a PCPage Troubleshooting Power cable insulation is Damaged Live indicator keeps onLive indicator lights red Power cable, plugOperation status Indicator status About the live indicatorCamera when there are It is hard to see images withAlarm in 3 AUX OUT x1 each SpecificationsAlarm in 1 BLACK/WHITE IN/ Alarm in 2 Alarm OUT Terminal 1, Terminal 2, and TerminalLens ATW1/ ATW2/ AWCJpeg Mjpeg MLD, ICMP, ARPBB-HCA8A Standard accessoriesOptional accessories BB-HCA8CEPage Page Page Page Page Page Panasonic Corporation For business users in the European UnionFor U.S. and CanadaFor Europe and other countries Http//panasonic.net
Top Page Image Contents