Panasonic WV-SW598 installation instructions Configure the network settings

Page 31

Configure the network settings

Configuring the camera so that it can be accessed from a PC

The following are descriptions for when the camera with default settings is configured. If you are using firewall software on your PC, the Setup Program may not be able to find any cameras on your network. Configure the setting of the camera after temporarily invalidating the firewall software. Contact the network administrator or your Internet service provider for information about configuring the settings of the network.

zInsert the provided CD-ROM into the CD-ROM drive of your PC.

•The License Agreement will be displayed. Read the Agreement and choose “I accept the term in the license agreement”, and click [OK].

•The launcher window will be displayed. If the launcher window is not displayed, double click the “CDLauncher. exe” file on the CD-ROM.

Note:

•Refer to “Using the CD-ROM” in the Operating Instructions on the provided CD-ROM for further information about CDLauncher.

xClick the [Run] button next to [IP Setting Software].

[Panasonic IP Setting] screen will be displayed. Click the [Network Settings] button after selecting the MAC address/IP address of the camera to be configured.

cSelect the camera you want to configure, and click [Access Camera].

Note:

•When cameras are displayed in [Panasonic IP Setting] screen, click the camera with same MAC address as the MAC address printed on the camera that you want to configure.

31

Image 31

Contents Cs0313-1043 PGQX1224YACan ICES-3A/NMB-3A Contents Important safety instructions Limitation of liability Disclaimer of warrantyPreface Main functions CPU System requirements for a PCIntel CoreTM 2 Duo 2.4 GHz or faster recommended Copyright Trademarks and registered trademarksNetwork security Precautions This product has no power switch Do not damage the power cableCorrectly perform all wiring Turn the power off when cleaning this productCode label Periodically images on the screen appear to be dis- tortedWhat to do if Warming UP-PLEASE Wait appears on the display About SD memory cardTilt angles and the zoom ratio Position refreshPrecautions for installation Take notice of humidity Check before installationPoE+ Power over Ethernet Plus Time & date settingMain body Major operating controlsOFF šON Initialize the camera Turn off the power of the cameraStep Remove the locking screw of the water-resistant cap How to insert an SD memory cardWhen inserting an SD memory card, make sure the direction Insert/remove an SD memory cardHow to remove the SD memory card Power Source IEC/EN/UL/CSA Installations/ConnectionsHow to detach the housing base When using the mount bracket custom-made InstallationInstall the mounting bracket When using the wall mount bracket WV-Q122 optionPlate spring Projection Dents Wire Detach the hooks Front/rear sunshields xing screw Connection 8P alarm cable connectorOutput cable for the monitor used for adjustment AC power supply connector kit accessoryRecommended specification of cable wire How to assemble the 24 V AC power supply con- nector kitAudio output cable External I/O cableRatings Microphone/line input cableRequired cable Connection exampleLAN cable category 5e or better, cross LAN cable category 5e or better, straight Configuring the camera so that it can be accessed from a PC Configure the network settingsPage Troubleshooting Power cable, plug Live indicator keeps onLive indicator lights red Power cable insulation is DamagedIt is hard to see images with About the live indicatorCamera when there are Operation status Indicator statusTerminal 1, Terminal 2, and Terminal SpecificationsAlarm in 1 BLACK/WHITE IN/ Alarm in 2 Alarm OUT Alarm in 3 AUX OUT x1 eachATW1/ ATW2/ AWC LensMLD, ICMP, ARP Jpeg MjpegBB-HCA8CE Standard accessoriesOptional accessories BB-HCA8APage Page Page Page Page Page Http//panasonic.net For business users in the European UnionFor U.S. and CanadaFor Europe and other countries Panasonic Corporation