VIP XD | Installation en 15 |
|
|
4Installation
4.1Preparations
Thanks to its
CAUTION!
The unit is intended for use indoors or in housings.
Select a suitable location for installation that guarantees to meet the environmental
! conditions. The ambient temperature must be between 0 and +50 °C (+32 and +122 °F). The relative humidity must not exceed 95%.
The VIP XD generates heat during operation, so you should ensure that there is adequate ventilation and enough clearance between the unit and
Please ensure the following installation conditions:
– Do not install the unit close to heaters or other heat sources. Avoid locations exposed to direct sunlight.
– Allow sufficient space for running cables.
– Ensure that the unit has adequate ventilation.
– When making connections, use only the cables supplied or use appropriate cables immune to electromagnetic interference.
– Position and run all cables so that they are protected from damage, and provide adequate cable strain relief where needed.
– Avoid impacts, blows and severe vibrations as these can irreparably damage the unit.
Bosch Security Systems | Installation and Operating Manual | DOC V4.0 2009.06 |