Bosch Appliances VIP, XD Power On/Power Off, Setup Using the Configuration Manager, Power Supply

Page 19

VIP XDInstallation en 19

4.3	Power On/Power Off

Power Supply

The VIP XD comes with a plug-in power supply unit (PSU) with four primary adapters and a terminal block. The VIP XD does not have a power switch. The VIP XD is ready for operation as soon as it is connected to the power supply.

CAUTION!

The VIP XD may only be operated using the supplied PSU with the correct primary adapter for

!your power outlet.

Where necessary, use suitable equipment to ensure that the power supply is free from interference such as voltage surges, spikes or voltage drops.

Do not connect the VIP XD to the power supply until all other connections have been made.

1.Plug the terminal block with the PSU cable connected to it into the orange socket on the

VIP XD.

2.Ensure that the correct primary adapter is attached to the power supply unit and that a suitable power outlet is available.

3.Plug the power supply unit into the grounded power outlet. The unit is ready for operation as soon as the operating status LED stops flashing red during start-up and lights up green.

Provided the network connection has been correctly made, the green L LED also lights up. The flashing orange T LED indicates data traffic on the network.

4.4	Setup Using the Configuration Manager
	The Configuration Manager program can be found on the product CD contained in the scope
	of delivery. This program allows you to implement and set up new video servers in the
	network quickly and conveniently.

i	NOTICE!
	Using the Configuration Manager to set all parameters in the VIP XD is an alternative to
	configuration by means of a Web browser, as described in chapter 5 of this manual.

Installing the Program

1.Insert the CD into the computer's CD-ROM drive.

2.If the CD does not start automatically, open the Configuration Manager directory using Windows Explorer and double-click Setup.exe.

3.Follow the on-screen instructions.

Bosch Security Systems

Installation and Operating Manual

DOC V4.0 2009.06

Image 19

Contents VIP XD Page Table of Contents Appendix Maintenance and UpgradesSpecifications OperationIntended Use PrefaceAbout this Manual Conventions in this ManualRating Plate EU DirectivesElectric Shock Hazard Safety InformationInstallation and Operation Maintenance and RepairEn Safety Information Scope of Delivery Product DescriptionAdditional Operational Requirements Additional Configuration RequirementsSystem Requirements General RequirementsOverview of Functions Https SummaryConnections on the Front Panel LED Connections on the Rear Panel1Preparations 4Installation2Connections Network Alarm InputsData Interface Maximum rating of the relay contact is 30 V and 2 a Selv Relay OutputInstalling the Program Power On/Power OffSetup Using the Configuration Manager Power SupplyAdditional Parameters Configuring the VIP XDClick Unit network settings... in the popup menu RebootSystem Requirements Configuration Using a Web Browser1Connecting Installing Mpeg ActiveXMaximum Number of Connections Establishing the ConnectionProtected Network Protected VIP XDNavigation Configuration MenuMaking Changes Device name 4Password3Identification Device ID5Date/Time Time server IP address Daylight saving timeTime server type Device logo 6AppearanceWebsite language Company logoOverscan Decoder ProfileMonitor name StandardVGA screen size 8VGAHoriz. spacing / Vert. spacing ResolutionRefresh rate Border top / bottom / left / rightBorder color Resetting ChangesDetails Horizontal synchronization / Vertical synchronizationAudio Audio Version Only Monitor DisplayLine Out/Speaker SPK Alarm ConnectionsConnect on alarm Line In / Microphone MICVideo transmission Destination passwordNumber of destination IP address Destination IP addressAuto-connect Default cameraAudio Audio Version Only Threshold Audio Alarm Audio Version OnlyAudio alarm NameAlarm E-Mail Sender name FormatStandard E-mail Destination addressAlarm Task Editor Idle state Alarm InputsAlarm input RelayConnection Operating mode10 s Relay follows Off17 COM1 Network Gateway address Automatic IP assignmentIP address Subnet maskTelnet support Interface mode ETHEnable DynDNS RCP+ portStatus AdvancedSnmp host address / 2. Snmp host address Identity AuthenticationEncryption Snmp trapsFirmware MaintenanceDownload 192.168.0.32/resetMaintenance log UploadSystem Overview LicensesFunction Test 6Operation En Operation Protected VIP XD Preview 2The ConnectionsMonitor Connections Between the Sender and Receiver Selecting Decoder for Quad View Controlling ConnectionsMulticast scan Hardware Connections Between Video Servers ConnectingConnecting on Alarm Connecting with a Terminal Program5Operation with Management Software Testing the Network Connection Maintenance and Upgrades2Unit Reset Transfer and Disposal RepairsMalfunction Possible causes Recommended solution 1Troubleshooting8Appendix En AppendixVIP XD Operating Status LED LEDs3Processor Load Network ConnectionPin Assignment Contact RS-232 mode RS-422 mode RS-485 modeSerial Interface Terminal BlockData Terminal Configuring the TerminalCommand Inputs Communication with Terminal ProgramAssigning an IP Address 8Copyrights En Appendix Unit SpecificationsAudio Version Only PAL, Ntsc Protocols/StandardsGlossary Ieee GOPHttp IcmpMSS MIBMPEG-2 MPEG-4SSL SniaSnmp SntpEprom IndexRadius Serial number Serial port function Signal source SMS Page Bosc h Sicherheitssysteme GmbH

Related manuals

Manual 7 pages 2.9 Kb