Bosch Appliances VIP, XD Safety Information, Electric Shock Hazard, Installation and Operation

XIP XDSafety Information en 7

2	Safety Information
2.1	Electric Shock Hazard
	– Never attempt to connect the unit to any power network other than the type for which it
	is intended.
	– Use only the power supply unit provided.
	– Never open the housing.
	– Never open the housing of the power supply unit.
	– If a fault occurs, disconnect the power supply unit from the power supply and from all
	other units.
	– Install the power supply and the unit only in a dry, weather-protected location.
	– If safe operation of the unit cannot be ensured, remove it from service and secure it to
	prevent unauthorized operation. In such cases, have the unit checked by Bosch Security
	Systems.
	Safe operation is no longer possible in the following cases:
	– if there is visible damage to the unit or power cables,
	– if the unit no longer operates correctly,
	– if the unit has been exposed to rain or moisture,
	– if foreign bodies have penetrated the unit,
	– after long storage under adverse conditions, or
	– after exposure to extreme stress in transit.
2.2	Installation and Operation
	– The relevant electrical engineering regulations and guidelines must be complied with at
	all times during installation.
	– Relevant knowledge of network technology is required to install the unit.
	– Before installing or operating the unit, make sure you have read and understood the
	documentation for the other equipment connected to it, such as monitors. The
	documentation contains important safety instructions and information about permitted
	uses.
	– Perform only the installation and operation steps described in this manual. Any other
	actions may lead to personal injury, damage to property or damage to the equipment.
2.3	Maintenance and Repair
	– Never open the housing of the VIP XD. The unit does not contain any user-serviceable
	parts.
	– Never open the housing of the power supply unit. The power supply unit does not contain

any user-serviceable parts.

– Ensure that all maintenance or repair work is carried out only by qualified personnel (electrical engineers or network technology specialists).

Bosch Security Systems Installation and Operating Manual DOC V4.0 2009.06