VIP XDConfiguration Using a Web Browser en 29
5.7 | Decoder Profile |
In this screen you can set the various options for the display of video images on an analog monitor or VGA monitor. A number of presets are available for configuring the VGA video output signal. These presets can be adapted to individual requirements if necessary.
Monitor name
You can give the monitor connected to the VIP XD a name to make it easier to identify. The name makes the task of administering multiple units in larger video monitoring systems easier, for example using the VIDOS or Bosch Video Management System programs.
The monitor name allows you to remotely identify the monitor location. For this reason, enter a name that makes it as easy as possible to quickly identify the location.
Standard
CAUTION!
!Be sure to choose the correct video standard to avoid damaging the monitor. Selecting a VGA setting with values outside the technical specification of the monitor can result in severe
damage to the monitor. Refer to the technical documentation of the monitor you are using.
You can adapt the video output signal to the monitor you are using. Eight
Each
Details of the settings can be seen in the VGA field. Here you can also adapt the options to individual requirements if necessary.
1.Test different
2.After selecting a setting, click the Set button to activate the setting at the video output.
Overscan
You can use the Overscan function to display images with clear, straight edges that go right up to the monitor margins.
Deactivate the Overscan function if you are using an analog monitor and single view display.
Window layout
You can specify the default image layout for the monitor. The image layout can also be selected at any time during operation on the CONNECTIONS page.
Bosch Security Systems | Installation and Operating Manual | DOC V4.0 2009.06 |