50 en Configuration Using a Web Browser | VIP XD |
|
|
Configuration
You can save configuration data for the VIP XD on a computer and then load saved configuration data from a computer to the unit.
Upload
1.Enter the full path of the file to upload or click Browse to select the required file.
2.Make certain that the file to be loaded comes from the same unit type as the unit you want to configure.
3.Next, click Upload to begin transferring the file to the unit. The progress bar allows you to monitor the transfer.
Once the upload is complete, the new configuration is activated. The time remaining is shown by the message going to reset Reconnecting in ... seconds. The unit reboots automatically once the upload has successfully completed.
Download
1.Click the Download button. A dialog box opens.
2.Follow the
SSL certificate
To be able to work with an SSL encrypted data connection, both ends of a connection must hold the relevant certificates. You can upload the SSL certificate, comprising one or multiple files, onto the VIP XD.
If you wish to upload multiple files onto the VIP XD, you must select them consecutively.
i | NOTICE! | |
The certificate must be created in the format *.pem so that it can be accepted by the unit. | ||
|
1.Enter the full path of the file to upload or click Browse to select the required file.
2.Next, click Upload to begin transferring the file to the unit.
3.Once all files have been successfully uploaded, the unit must be rebooted. In the address bar of your browser, enter /reset after the IP address of the VIP XD (for example
192.168.0.32/reset).
The new SSL certificate is valid.
Decoder logo
If no video camera is selected, the decoder logo is displayed instead of the camera image. It is possible to create your own decoder logo and load it onto the VIP XD.
To create the logo, you need a special program, which is available from Bosch Security Systems. Standard image formats are not supported for the decoder logo.
1.Enter the full path of the file to upload or click Browse to select the required file.
2.Click Upload to transfer the file to the unit.
Delete decoder logo
Click Delete decoder logo to remove the decoder logo.
Maintenance log
You can download an internal maintenance log from the unit to send it to Customer Service for support purposes. Click Download and select a storage location for the file.
DOC V4.0 2009.06 | Installation and Operating Manual | Bosch Security Systems |