Bosch Appliances VIP, XD Connections Between the Sender and Receiver, Establishing the Connection

VIP XDOperation en 57

6.3	Connections Between the Sender and Receiver
	When you open the CONNECTIONS page, the VIP XD automatically scans the network for
	available senders. As soon as a sender is found in the network, the VIP XD displays a JPEG
	snapshot from that sender. All senders found are listed in the Video sources list field.
i	NOTICE!
	The sender and receiver must be located in the same subnet to establish a hardware
	connection.
	Establishing the Connection
	NOTICE!
	If you do not connect, the unit may have reached its maximum number of connections. The
i	maximum number of connections depends on the unit and network configuration.
	The Serial data and Audio checkboxes must be selected before the connection is made in
	order to activate data and audio transmission. The window displays a green loudspeaker icon
	in the bottom right corner of the video image the first time an audio connection is made. This
	icon indicates which sender is holding the active audio link.
	1.	Choose the desired sender from the Video sources list field.
	2.	If necessary, enter the password.
	3.	Click OK. If the password is correct, a JPEG snapshot from the selected video source
		appears in the Preview area.
	4.	If the sender is a multi-channel unit, for example a VideoJet X40, you can set the Video
		input for playback.
	5.	If the sender works with Dual Streaming, for example a VIP X1600, you can select the
		Stream for playback.
	6.	Check the Serial data checkbox if you also want to transmit transparent data. Ensure
		that the sender and receiver are correctly configured for data transmission.
	7.	Check the Audio checkbox if you also want to transmit audio data. Ensure that the
		sender and receiver are correctly configured for audio transmission.
	8.	Click the appropriate checkbox again to deactivate the data or audio connection.
	9.	Click the MPEG-2->, MPEG-4 SH++ ->or H.264 ->button to start displaying the video
		images on the connected monitor. In the Monitor area you will see the video image from
		the connected sender. The image is refreshed around once per second.

Bosch Security Systems Installation and Operating Manual DOC V4.0 2009.06