26 en Configuration Using a Web Browser | VIP XD |
|
|
Password
The VIP XD operates with two authorization levels: service and user.
The highest authorization level is service. After entering the correct password, you can access all the functions of the VIP XD and change all configuration settings.
You can use the user authorization level to connect the unit to a sender in the network and to disconnect it, but you cannot change the configuration.
You can define and change a password for each authorization level if you are logged in as service or if the unit is not password protected.
Enter the password for the appropriate authorization level here.
Confirm password
In each case, enter the new password a second time to eliminate typing mistakes.
NOTICE!
i A new password is only saved when you click the Set button. You should therefore click the Set button immediately after entering and confirming a password.
5.5Date/Time
Date format
Select your required date format.
Unit date / Unit time
If there are multiple devices operating in your system or network, it is important to synchronize their internal clocks. For example, it is only possible to identify and correctly evaluate simultaneous recordings when all units are operating on the same time.
1.Enter the current date. Since the unit time is controlled by the internal clock, there is no need to enter the day of the week – it is added automatically.
2.Enter the current time or click the Sync to PC button to copy your computer's system time to the VIP XD.
Unit time zone
Select the time zone in which your system is located.
DOC V4.0 2009.06 | Installation and Operating Manual | Bosch Security Systems |