Security Escort Technical Reference Manual 3.0 System Menus and Screens
EN 61
In the Security Escort System used for remote access
This screen sets up the remote access parameters that allow remote connection to a live Security Escort System. Program all Comm port indexes in the Transponder Comm Port Setup Screen to none. In the Remote Comm Port Setup Screen, set the network port to none and set the modem to the Comm port of the modem. The speed selected should be greater than the speed of the modem and the same as the speed selected for the live system being called. In the Remote Setup Screen, set the master/slave/remote setting to remote. In the Remote Connection Screen select the Insert button and enter a name, password, phone number, and three- character file extension for this system’s database files. Using a disk written with the Backup command of the system you desire access to, restore the database files. Select the system you just entered from the dropdown list box in the Remote Connection Screen. Exit the Remote Connection Screen and select Restore Screen under the Utilities Menu. Restore from the backup floppy to each databases. When done, you should also store a copy of the map file in the Escort
Insert New
Clicking this button presents a blank Phone Book Edit Screen to enter a new remote access Security Escort System.
Edit
Selecting the desired Security Escort System and then clicking this button allows the existing Security Escort System data to be edited.
Delete
Selecting the desired Security Escort System and then clicking this button deletes the data for the selected Security Escort System.
Dial
Selecting the desired Security Escort System and then clicking this button attempts to connect the selected Security Escort System. This selection is only available on the remote computer; it is not available on a live Security Escort system.
Answer
This option is only available in a live Security Escort System. Click this button manually answers an incoming call from a remote Security Escort System.
Disconnect
Clicking this button drops a remote connection. This can be done either on the live system or the remote access system.
Cancel
Clicking this button closes this screen but does not disconnect a remote access connection. At this point, you can navigate the menus and screens on the remote system as if you were at the on- site slave computer system. To drop the connection, return to this screen and click Disconnect.
3.3.22 Phone Book Edit Screen
This screen edits existing entries and adds new phone book entries for remote system access.
Figure 577: Phone Book Edit Screen
System Name
This is a reference name for the Security Escort System to be accessed remotely. Use to select the desired system to be accessed in the Remote Connection Screen.
Phone Number
The phone number to be dialed to access the Security Escort System. Enter a comma for each 2 sec. pause desired.
Bosch Security Systems 6/12 38947D