Security Escort Technical Reference Manual 3.0 System Menus
and Screens
EN 62
Access Password
This is the password used to gain access to the remote Security Escort System. On the live system being dialed into, set the remote password in the Remote Setup Screen. If the first five characters of the password match, the remote system allows read only access. If all twelve characters match, you can change system parameters remotely.
Verify Password
For verification, retype the password
entered into Access Password.
3 Character System ID
Enter a unique three character ID that is used as an extension to the map and database files for accessing this Security Escort System.
3.3.23Pager Setup Screen
This screen sets up remote pager access for troubles (service) and alarms (security).
Figure 588: Pager Setup Screen
Automatically Send Selected Troubles
If checked, send the troubles selected in the
Phone Number
Phone number to be dialed to access the paging service. This phone number is usually different from the number you manually dial to send a page. The paging company assigns this value.
Password
This is the password that must be sent to the paging service to send the page. If not required, leave this field blank. Usually a password is not required. The paging company assigns this value.
Pager ID
This is the ID that identifies the specific pager this message is to be sent to. Many times it is the last seven digits of the phone number you would manually dial to access this pager. The paging company assigns this value.
Character Limit
This is the maximum number of characters allowed per page. Typically, this is set to 80 characters. The Security Escort System truncates the pager message at this number of characters. The paging company assigns this value.
Pages Per Call
This is the maximum number of pager messages allowed per phone call. Typically, this is set to four pages per call. When this number of messages is sent and there are more messages to be delivered, the Security Escort System hangs up and redials the paging service to deliver the remaining messages. The paging company assigns this value.
Pager Group
This is the group of up to eight pagers this message is sent to. You can program the individual pager as well as a group of pagers. The pager group is sent the page before the individual.
Baud Rate
This is the baud rate used to communicate with the paging computers. The paging company assigns this value.
System Name
This identifies the Security Escort System when multiple Security Escort Systems report to the same service pager. Keep this field as short as possible since these characters, plus a space, are sent before each trouble message and are included in the character limit. If not desired, leave blank.
System Phone
This presents phone numbers to call in response to the service page. Only use if required since these characters, plus a space, are sent before each trouble message. They are included with the system name in the character limit. If not desired, leave blank.
Bosch Security Systems 6/12 38947D