Bosch Appliances 500 user manual Activate Feature Menu, 3Preset Tour Menu, Config Mode, Sonyset

Page 26

26 en Navigating the MenusMIC Series 500 Camera

5.1.1	Config Mode
		The Config Mode settings are available through the on-screen menu and offers the user a
		quick way to set up the unit for various configurations (see Table 5.2 for the available options
		and settings when the Config Mode is set).

			Image Flip	Pan Reverse	Tilt Reverse	Privacy

		Upright	OFF	OFF	OFF	Upright

		Canted	OFF	OFF	OFF	Canted

		Inverted	OFF	ON	OFF	Inverted

		Table 5.2 Config Mode Options and Settings when Set
5.2	Activate Feature Menu

The Activate Feature menu can be used to initiate a Preset or Pattern tour once the menu is closed, or to directly call up an individual SonySet preset.

MAIN MENU

1/2

MIC SETUPS

ACTIVATE FEATURE

PRESET TOUR

PATTERN TOUR

PRESETS

COMMUNICATIONS

ADVANCED SETUPS

ALARMS

..ACTIVATE FEATURE..
PRESET TOUR NO	1
START TOUR
PATTERN TOUR NO.	1
START TOUR
SONYSET NO	1
RUN SONYSET

Menu Item	Description

PRESET TOUR	To start a preset or pattern tour, select the number under the appropriate option, and then
	press right on the “Start Tour” immediately under the feature required. For example, to start
PATTERN TOUR
	Preset Tour 3, change “Preset Tour No.” to 3, then press “Start Tour” directly underneath. The
	tour begins approximately 1 second after the menu has been closed.

SONYSET	Select the required Sony Set preset using “Sonyset No.” and press “Run SonySet” directly
	below. The preset table is activated immediately.

5.3Preset Tour Menu

To program a Tour, access the Preset Tour menu; specify the tour number from 1 to 6 then press right to enter the Tour Settings page. Once inside the menu, there is one setting available “No of Tour Points,” two (2) further sub menus “Tour Point Settings” and “Create / Modify Tour” and then a save tour option.

MAIN MENU

1/2

MIC SETUPS

ACTIVATE FEATURE

PRESET TOUR

PATTERN TOUR

PRESETS

COMMUNICATIONS

ADVANCED SETUPS

ALARMS

..PRESET TOUR 1..

NUMBER OF TOUR

POINTS5

TOUR POINT SETTINGS CREATE/MODIFY TOUR

SAVE TOUR

.. TOUR SETTINGS ..

DWELL SETTINGS
DEFAULT	10
MAX RANDOM	64
MIN RANDOM
PRESET SETTINGS
MAX RANDOM	10
MIN RANDOM	1

F.01U.173.601 2.0 2010.11

User’s Manual

Bosch Security Systems, Inc.

Image 26

Contents MIC Series 500 Camera Page Table of Contents Appendices 1Safety Important Safety InstructionsSafety Precautions Important Notices Coax groundingFCC & Ices Information A. and Canadian Models OnlyInformations FCC ET Ices DisclaimerCopyright TrademarksCustomer Support and Service Additional Tools Required Parts ListUnpacking Quantity Part3Description 1Features2Power 3Video4Mounting Part DescriptionAdjusting the MIC 500 Series Camera Pan body fixing screwsCanting in progress Adjusting the Rain Shield for Inverted Operation Remove screwsMounting the MIC 500 Series Camera Electrical Connections Earthing the MIC 500 Series CameraLightning Protection 13 Composite cable before connection Red Navigating the Menus Menu Item Description Exit1MIC Setups Menu Available only via the menu see .1.1 Config Mode,Tour Setting Options DefaultON/OFF ON/OFF OSDConfig Mode Activate Feature Menu3Preset Tour Menu Image Flip Pan Reverse Tilt Reverse PrivacyRandom Tours Tour Setting ValueCreate/Modify Tour Recording a Pattern Tour Tour Point Preset Position Dwell TimePattern Tour Menu Preview TourGoto Preset 5Presets MenuLearn Preset 6Communications Menu Manual ControlAdvanced Setups Menu Menu Item Description Options DefaultWipes Wipe ModeINT Hour AutoFactory Defaults Re-map Pelco Aux Pelco D and P Protocols onlyAux Number Function Alarms MenuRelay 2 Status SET with Alarm Normally Closed Menu Item Description OptionsRelay Relay Activation Alarm Relays and Re-arm Time9Sony Set Menu Relay StateNumber Mapping to a MIC 500 Series Camera FunctionExposure Shutter Priority 4 SET Shutter Function ValueOn / OFF Setting OptionsSetting Values Available Aperture Reset / Plus 1 / Minus Aperture Set Low Lux Brightness Value Iris Setting Gain Setting Exposure Comp Value Iris Setting Gain Setting Focus Pos Focus DistanceIris Value Iris Setting Gain Value Gain SettingCaptions Menu Shutter Value Shutter Speed10.4Setting Captions 10.1 Default Caption10.2 Preset Captions 10.3 Sector CaptionsBlank Single Blank Save Single Save Sector /4 Sector Caption11.1 Mask / Clear Whole 11.2Setting the Privacy ZonesPrivacy Menu Menu Item OptionsPot Test Menu 13MIC Information MenuWipe Mode Normal WASH-WIPE OFF Goto Preset Mapping Sony SETCurrent MIC Settings Auto Alarm OFF Multi Alarm Alarm Rearm Control Card Data Serial Issue 8A14Set User Access Menu 13.1 MIC Information MenusOSD OFF 14.1 Factory DefaultsSetting Default Value Support USA Help Menu16Self Diagnosis EmeaAppendices MIC 500 Series Aux ControlsPreset Number Go To / Shot Preset Function MIC 500 Preset ControlsPreset Number Learn and Go to Preset Function Preset Number Learn Preset Function MIC 500 Model Numbers and Descriptions Model No DescriptionPage Bosch Security Systems, Inc

Related manuals

Manual 8 pages 56.48 Kb