Bosch Appliances 500 user manual 5Presets Menu, Learn Preset, Goto Preset

Page 29

MIC Series 500 CameraNavigating the Menus en 29

Menu Item

Description

 

 

LENGTH

Defines how many seconds the user will be allowed to manually control the MIC for before the

 

menu re-opens when recording a pattern tour.

 

 

RECORD

Closes the on screen menu, and starts the recording process. The user regains full control of the

 

MIC during the allotted LENGTH time with all of the inputs being recorded to memory for playback

 

at any point.

 

 

REVIEW TOUR

Performs a single playback of the currently selected pattern.

 

 

5.5Presets Menu

The Presets menu provides access to view and set 64 preset positions which are accurate to 0.08° in pan and tilt. Twelve (12) of these prepositions are set aside for Multi Alarms, 1 is for Auto Alarm, and 1 is for the Wash Wipe position.

The preset section allows for setting or recalling any presets between 1 and 255. Although there are only 64 positional presets available in the unit, there are a number of functions mapped to learn preset numbers which can then be easily reached through the menu if a given keyboard does not support presets above a certain value.

MAIN MENU

1/2

MIC SETUPS

ACTIVATE FEATURE

PRESET TOUR

PATTERN TOUR

PRESETS

COMMUNICATIONS

ADVANCED SETUPS

ALARMS

..PRESETS..

PRESET NO. 1

MANUAL CONTROL LEARN PRESET GOTO PRESET

Menu Item

Description

 

 

PRESET NO.

Accesses a range of 1-255 customized preset shots.

 

 

LEARN PRESET

Enables the user to set a preset position.

 

 

GOTO PRESET

Accesses an existing preset.

 

 

MANUAL CONTROL

Enables the user to manually control the unit for ten (10) seconds to a preset position. See

 

Section 5.5.3 Manual Control, page 30.

 

 

5.5.1

Learn Preset

 

Preset shots are saved camera positions. To set a preset position, follow these steps:

 

1.

Select the PRESET NO, using the joystick Up/Down.

 

2.

Set the camera to the position you wish to record as the preset (using manual control,

 

 

see below).

 

3.

Press Right on the LEARN PRESET title and an indication of the completion is shown.

 

4.

The camera position is assigned to your selected preset number.

5.5.2

GOTO Preset

 

To go to an existing preset, follow these steps:

 

1.

Select the PRESET NO, using the joystick Up/Down.

 

2.

Move the joystick to the right on GOTO PRESET title. The camera will now move to the

 

 

selected preset.

Bosch Security Systems, Inc.

User’s Manual

F.01U.173.601 2.0 2010.11

Page 28 Page 30
Image 29
Page 28 Page 30
Contents MIC Series 500 Camera Page Table of Contents Appendices Important Safety Instructions 1SafetySafety Precautions Coax grounding Important NoticesA. and Canadian Models Only FCC & Ices InformationDisclaimer Informations FCC ET IcesTrademarks CopyrightCustomer Support and Service Unpacking Parts ListAdditional Tools Required Quantity Part2Power 1Features3Description 3VideoPart Description 4MountingPan body fixing screws Adjusting the MIC 500 Series CameraCanting in progress Remove screws Adjusting the Rain Shield for Inverted OperationMounting the MIC 500 Series Camera Electrical Connections Earthing the MIC 500 Series CameraLightning Protection 13 Composite cable before connection Red Navigating the Menus Exit Menu Item DescriptionAvailable only via the menu see .1.1 Config Mode, 1MIC Setups MenuON/OFF Setting Options DefaultTour ON/OFF OSD3Preset Tour Menu Activate Feature MenuConfig Mode Image Flip Pan Reverse Tilt Reverse PrivacyRandom Tours Tour Setting ValueCreate/Modify Tour Pattern Tour Menu Tour Point Preset Position Dwell TimeRecording a Pattern Tour Preview TourGoto Preset 5Presets MenuLearn Preset Manual Control 6Communications MenuMenu Item Description Options Default Advanced Setups MenuINT Wipe ModeWipes Hour AutoRe-map Pelco Aux Pelco D and P Protocols only Factory DefaultsRelay 2 Status SET with Alarm Normally Closed Alarms MenuAux Number Function Menu Item Description Options9Sony Set Menu Alarm Relays and Re-arm TimeRelay Relay Activation Relay StateExposure Shutter Priority 4 SET Shutter Mapping to a MIC 500 Series Camera FunctionNumber Function ValueOn / OFF Setting OptionsSetting Values Available Aperture Reset / Plus 1 / Minus Aperture Set Low Lux Brightness Value Iris Setting Gain Setting Focus Pos Focus Distance Exposure Comp Value Iris Setting Gain SettingGain Value Gain Setting Iris Value Iris SettingShutter Value Shutter Speed Captions Menu10.2 Preset Captions 10.1 Default Caption10.4Setting Captions 10.3 Sector CaptionsSector /4 Sector Caption Blank Single Blank Save Single SavePrivacy Menu 11.2Setting the Privacy Zones11.1 Mask / Clear Whole Menu Item Options13MIC Information Menu Pot Test MenuCurrent MIC Settings Auto Alarm OFF Multi Alarm Alarm Rearm Goto Preset Mapping Sony SETWipe Mode Normal WASH-WIPE OFF Control Card Data Serial Issue 8A13.1 MIC Information Menus 14Set User Access MenuOSD OFF 14.1 Factory DefaultsSetting Default Value 16Self Diagnosis Help MenuSupport USA EmeaMIC 500 Series Aux Controls AppendicesPreset Number Go To / Shot Preset Function MIC 500 Preset ControlsPreset Number Learn and Go to Preset Function Preset Number Learn Preset Function Model No Description MIC 500 Model Numbers and DescriptionsPage Bosch Security Systems, Inc
Related manuals
Manual 8 pages 56.48 Kb
Top Page Image Contents