Mapping to a MIC 500 Series Camera Function

36 en Navigating the Menus	MIC Series 500 Camera

SONY SET

CAPTIONS PRIVACY POT TEST

MIC INFORMATION ENTER PASSWORD HELP

EXIT

MAPPED TO	PRESET
NUMBER	5
NO. COMMANDS	4

SETUP COMMAND LIST

SAVE SONYSET

EXIT WITHOUT SAVING

1: WHITE BALANCE

: MANUAL

2 : SET RED GAIN : 250

3: EXPOSURE

:SHUTTER PRIORITY 4 : SET SHUTTER

:10

Menu Item	Description	Options

MAPPED TO	This is the function to which the current Sony Set table is	Nothing / Normal /
	mapped. If Sony Set 1 is MAPPED TO preset 23, and if you	Preset with PTZ /
	perform a go to preset 23 action, the camera will also call up	Preset without PTZ /
	Sony Set 1 from memory. ALARM maps to a given alarm input,	Alarm
	PRESET W.OUT PTZ means that the camera calls the Sony Set
	table but will not moved to the stored position associated with
	that preset. NORMAL is the preset that is called whenever the
	user moves away from a different mapping; if a Preset mapped
	SonySet is called, and then you move away from this position,
	the NORMAL Sony Set is called.

NUMBER	This is the value associated with the MAPPED TO field. Only valid	N/A / Preset 1-64 /
	for some functions, PRESET WITH PTZ, PRESET W.OUT PTZ and	Multi Alarm 1-12
	ALARM (multi alarm only).

NO. COMMANDS	The number of commands available in the currently selected	1-10
	Sony Set table.

SETUP COMMAND LIST	Sub page for defining each command and associated value.

5.9.1	Mapping to a MIC 500 Series Camera Function
		If utilizing the mapping functionality of the Sony Set options, there should be a Sony Set table
		(1 as default) mapped to normal which changes all of the options set in the other tables back
		to a default condition for the camera.
		For example, for an ANPR setup on preset 10, table 2 should resemble something as follows:

		Function	Value

		Exposure	Shutter Priority

		Shutter Set	14

To ensure that the camera returns to a normal state once leaving this preset, one of the Sony Set tables must be mapped to Normal and have the following in it:

Function

Exposure

Value

Auto

The normal setup is also loaded on boot. Mapping to an alarm works in exactly the same way as the preset mapping, being called when the respective alarm input is triggered. If Multi Alarms is not switched on, then the table can be mapped to the tamper switch input.

The Sony Set sub menu is called in the same way as Setup Tour in that a Sony Set table number, 1 to 10, must be selected before it is opened.

There are 3 options on the main page which set up the overall information of the Sony Set table, with the individual commands being specified on the Setup Command List sub menu. If Preset is selected on the Mapped To option, the number option becomes available, allowing a

F.01U.173.601 2.0 2010.11

User’s Manual

Bosch Security Systems, Inc.

3: EXPOSURE

:SHUTTER PRIORITY 4 : SET SHUTTER

Menu Item

NUMBER