Bosch Appliances 500 user manual Create/Modify Tour, Random Tours, Tour Setting Value

MIC Series 500 Camera Navigating the Menus en 27

:PRESET

: DWELL

-----------------------------------------------

1:1

2:2

3:RANDOM

4:RANDOM

5:5

:5

:DEFAULT

:5

:RANDOM

:5

Menu Item	Description
NUMBER OF TOUR	The number of tour points ranges from 1 to 32, with each point having an available
POINTS	preset position and dwell time, programmable on the Create / Modify Tour page.
TOUR POINT SETTINGS	Contains the default and random limit settings. The settings are separated into Dwell
	and Preset sub headings. If a tour point is defined to use a random preset or random
	dwell, the values remain within the bounds set on this page.
CREATE/MODIFY TOUR	Shows a list of the individual tour points in a tabular fashion. The number of points
	available is defined by the setting on the previous page. Up and down controls move the
	highlighted line to the next or previous tour point respectively, moving on to the next
	page if the cursor is moved past the end (see Section 5.3.1 Create/Modify Tour, page 27).
RANDOM TOURS	Moves intelligently through the presets if the random option is chosen. It will not repeat
	a given position until all preset in the selection have been visited.

5.3.1	Create/Modify Tour
	To modify one of the settings, select the tour point by moving right, which will highlight the
	line in green. The preset number will start flashing indicating this setting is now changeable
	by toggling up and down.
	Four (4) tours are programmable each with up to 32 steps. Each step can be individually
	programmed with a preset position number (1 to 64) and a dwell time in seconds (1 to 240).
	To change the dwell time, send another Right command which will start the dwell option
	flashing, as before up and down changes this value.
	To select Random or Default options, move the joystick to either end of the available options.
	For presets, the random values are between 1 and 64. For dwell times, random and default
	settings are between 1 and 240.

5.3.2	Random Tours
		To make the random options work, a few limits must be set up which indicate the range of
		presets available, and the time scale available for dwell times. For example, setting a preset
		position as Random and the limits as 5 and 20 respectively, the camera moves to a random
		preset position between 5 and 20 and waits there for the given dwell time, which can also be
		random and operates in the same way. Alternatively, for the dwell there is a default option,
		the value of which can also be changed to the users requirements.
		Example of tour setup:
		Tour Setting	Value
		Min. Random Preset Position	5
		Max. Random Preset Position	15
		Min. Random Dwell Time	10

Bosch Security Systems, Inc. User’s Manual F.01U.173.601 2.0 2010.11