Bosch Appliances 500 user manual 4Mounting, Part Description

Page 14

14 en Mounting

MIC Series 500 Camera

 

 

4Mounting

Installation should be made by qualified service personnel and conform to the National Electrical Code and applicable local codes.

The MIC 500 Series Camera range has been designed for easy installation on a variety of common fittings. The most common type of mount used is a dedicated CCTV camera pole where the camera is bolted directly to the top of the pole using industry standard 4 in. (101.6

mm)fittings. This type of camera pole provides a robust mounting platform that minimizes camera motion and typically has a large base cabinet for mounting ancillary equipment such as power supplies.

The camera can also be mounted on lamp post columns using the Pole Mount Bracket (MIC- PMB); however, users should be aware that lamp posts can often be subject to movement and are not suitable platforms in all conditions or for all applications.

The following mounting brackets are available:

Part

Description

 

 

MIC-SPA

Wall Spreader Plate

 

 

MIC-PMB

Pole Mount Bracket

 

 

MIC-CMB

Corner Mount Bracket

 

 

MIC-WMB

Wall Mount Bracket

 

 

MIC-SCA

Shallow Conduit Adaptor

 

 

MIC-DCA

Deep Conduit Adaptor

 

 

For mounting directly to a building, brackets are available for all typical building installations such as upright (90°), canted (45°), or inverted.

Figure 4.1 Typical pole mount arrangement (MIC-PMB with MIC-SCA and MIC-WMB)

Figure 4.2

Typical wall mounting arrangement (MIC-SPA, MIC-SCA and MIC-WMB)

 

 

 

F.01U.173.601 2.0 2010.11

User’s Manual

Bosch Security Systems, Inc.

Image 14
Contents MIC Series 500 Camera Page Table of Contents Appendices 1Safety Important Safety InstructionsSafety Precautions Important Notices Coax groundingFCC & Ices Information A. and Canadian Models OnlyInformations FCC ET Ices DisclaimerCopyright TrademarksCustomer Support and Service Additional Tools Required Parts ListUnpacking Quantity Part3Description 1Features2Power 3Video4Mounting Part DescriptionAdjusting the MIC 500 Series Camera Pan body fixing screwsCanting in progress Adjusting the Rain Shield for Inverted Operation Remove screwsMounting the MIC 500 Series Camera Electrical Connections Earthing the MIC 500 Series CameraLightning Protection 13 Composite cable before connection Red Navigating the Menus Menu Item Description Exit1MIC Setups Menu Available only via the menu see .1.1 Config Mode,Tour Setting Options DefaultON/OFF ON/OFF OSDConfig Mode Activate Feature Menu3Preset Tour Menu Image Flip Pan Reverse Tilt Reverse PrivacyRandom Tours Tour Setting ValueCreate/Modify Tour Recording a Pattern Tour Tour Point Preset Position Dwell TimePattern Tour Menu Preview TourGoto Preset 5Presets MenuLearn Preset 6Communications Menu Manual ControlAdvanced Setups Menu Menu Item Description Options DefaultWipes Wipe ModeINT Hour AutoFactory Defaults Re-map Pelco Aux Pelco D and P Protocols onlyAux Number Function Alarms MenuRelay 2 Status SET with Alarm Normally Closed Menu Item Description OptionsRelay Relay Activation Alarm Relays and Re-arm Time9Sony Set Menu Relay StateNumber Mapping to a MIC 500 Series Camera FunctionExposure Shutter Priority 4 SET Shutter Function ValueOn / OFF Setting OptionsSetting Values Available Aperture Reset / Plus 1 / Minus Aperture Set Low Lux Brightness Value Iris Setting Gain Setting Exposure Comp Value Iris Setting Gain Setting Focus Pos Focus DistanceIris Value Iris Setting Gain Value Gain SettingCaptions Menu Shutter Value Shutter Speed10.4Setting Captions 10.1 Default Caption10.2 Preset Captions 10.3 Sector CaptionsBlank Single Blank Save Single Save Sector /4 Sector Caption11.1 Mask / Clear Whole 11.2Setting the Privacy ZonesPrivacy Menu Menu Item OptionsPot Test Menu 13MIC Information MenuWipe Mode Normal WASH-WIPE OFF Goto Preset Mapping Sony SETCurrent MIC Settings Auto Alarm OFF Multi Alarm Alarm Rearm Control Card Data Serial Issue 8A14Set User Access Menu 13.1 MIC Information MenusOSD OFF 14.1 Factory DefaultsSetting Default Value Support USA Help Menu16Self Diagnosis EmeaAppendices MIC 500 Series Aux ControlsPreset Number Go To / Shot Preset Function MIC 500 Preset ControlsPreset Number Learn and Go to Preset Function Preset Number Learn Preset Function MIC 500 Model Numbers and Descriptions Model No DescriptionPage Bosch Security Systems, Inc
Related manuals
Manual 8 pages 56.48 Kb