Cisco Systems 4300 manual Camera Settings Window, Microphone Area, Video Adjustments Area

Page 30

Chapter 3 Configuring and Managing the IP Camera

Feature Setup Windows

Table 3-2

Streaming Settings Window Options (continued)

 

 

 

Option

 

Description

 

 

Audio Sampling Rate

Display only. Displays the sampling rate for audio from the IP camera.

 

 

Audio Resolution

Display only. Displays the resolution for audio from the IP camera.

 

 

 

Camera Settings Window

The Camera Settings window provides options for selecting a microphone, making certain video adjustments, and configuring the operation of the IP camera day and night filters.

A microphone captures audio at the camera location. This audio is sent to the PC that you use to view video from the IP camera. You can listen to the audio when viewing video in the Camera Video/Control window.

The IP camera day and night filters allow the IP camera to optimize its video image for various lighting conditions. When the IP camera uses its day filter, it is operating in day mode. In this mode, the camera displays video images in color. When the IP camera uses its night filter, it is in night mode. In this mode, the camera displays video images in black and white.

To display the Camera Settings window, access the configuration windows as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5, click Feature Setup, then click Camera.

If you change any options in this window, you must click the Save Settings button to save the changes. If you do not click this button, changes are not retained when you exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.

Table 3-3describes the options in the Camera Settings window.

Table 3-3 Camera Settings Window Options

Option

Description

 

 

Microphone Area

Microphone Type

Choose the type of microphone that you are using.

•Internal Microphone—Audio is captured by the internal microphone on the IP camera.

•External Microphone—Audio is captured by an optional external microphone, available from third-parties. Choosing this option disables the internal microphone.

Video Adjustments Area

Auto Iris Mode

Choose whether auto iris mode is enabled or disabled:

•On—Auto iris mode is enabled. With this setting, the iris opening in the IP camera lens adjusts automatically based on light conditions. This setting is the default and recommended choice.

•Off - Auto iris mode is disabled. With this setting, the iris opening in the IP camera lens remains fully open.

Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide

3-6

OL-19609-04

 

 

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Americas Headquarters Text Part Number OL-19609-04Copyright 2009-2011 Cisco Systems, Inc. All rights reserved N T E N T S Log Windows Overview OrganizationPreface IP Camera Features OverviewIP Camera Physical Details Adjusting Back Focus on the IP Camera section on Front of IP CameraRear of IP Camera Described in the Resetting the IP Camera section on Side of IP CameraDC Auto Iris Lens Connector Pinouts Package ContentsInstalling the IP Camera Getting StartedAction Explanation Action Explanation Action Explanation Performing the Initial Setup of the IP Camera ProcedureBefore you Begin Accessing the IP Camera Protocol//ipaddressUnderstanding the IP Camera User Interface IP Camera Window LinksIP Camera Windows Link DescriptionField Description IO Port Status Adjusting Back Focus on the IP CameraLAN IP Channel 1 and ChannelPowering the IP Camera On or Off Resetting the IP CameraReset Type Procedure Remarks Initial Setup of the IP CameraSection on OL-19609-04 Configuring and Managing the IP Camera Accessing Navigating the Configuration WindowsFeature Setup Windows SnmpStreaming Settings Window Resolution Primary fps Secondary fpsStreaming Streaming Setup Area Option DescriptionCurrent Channel Area Audio Setup Area Video AreaCamera Settings Window Video Adjustments AreaMicrophone Area Described in , Viewing Live Video Day Night Filter AreaText Overlay Area Video Overlay Settings WindowIO Ports Settings Window IO PortsPan Tilt Settings Window Input Ports AreaOutput Ports RS-232 Settings Event Notification WindowPan/Tilt Area Event Triggering Area Option Email Notification Area Patrol Sequence Window Patrol Sequence Area Network Setup Windows Basic Settings WindowAnalytics Windows Basic Settings Area IP Addressing WindowBasic Device Operations Area Time Settings Window IP Addressing AreaLocal Time Area Set Time Mode AreaYou click Save Settings Clone PC Time buttonCisco Discovery Protocol CDP Area Discovery Settings WindowNTP Server Settings Area Show Neighbors buttonSnmp Settings Window Snmp v2c AreaSnmp v3 Area 8000000901IPv4addresshex 802.1x Settings Window IP Filter Settings Window EAP-PEAP Configuration OptionsEAP-FAST Configuration Options IP Filter Area QoS Settings WindowClass of Service CoS Area Filter Entries AreaAdministration Windows Differentiated Services DiffServ AreaAccount Initialization Window Administrator Accounts Area Access Protocols AreaSSH User Settings Window User List AreaMaintenance Settings Window Change buttonDelete button Reset button Factory Default AreaRestore button Reboot Area Reboot buttonFirmware Settings Window Addressing Window section onDevice Information Area Device Processes Window Firmware Maintenance AreaUpgrade button Details buttonLog Setup Settings Window, Local Log Window, Password Complexity WindowLog Setup Settings Window Log WindowsLocal Log Settings Area Syslog Settings AreaLocal Log Window Log List Area Log messages, see -25 onExplanation Severity Devicerebootmanual DefaultsrestoredDevicerebootauto EthsignaldegradeOutputtworeset LoginOutputonereset PowersupplyfailureStartstream TimedstswitchTimeregswitch StopstreamControl Description Video controlsStreaming Settings Window section on Video image controlsSave Snapshot button Image tools Hotspot Zoom buttonHotspot Pan/Tilt Mirror buttonFull Screen button Audio controlsAdd Preset Position Presets controlsSet Current Preset as Preset buttonPan/tilt speed controls Motion detectionMotion detection controls Enable Motion Detection check box Save Settings button Full Screen checkTroubleshooting Troubleshooting Numerics IN-2 Http HttpsLED IN-4IN-5 IN-6 IN-7 IN-8
Top Page Image Contents