Cisco Systems 4300 Discovery Settings Window, NTP Server Settings Area, Show Neighbors button

Chapter 3 Configuring and Managing the IP Camera

Network Setup Windows

Table 3-11 Time Settings Window Options (continued)

Option

Description

NTP Server Settings Area

Note These options do not apply if you choose the Manually Configure Time option.

Primary NTP Server	If you configured the IP camera to obtain its time from an NTP server,
	identify the primary NTP server by choosing IP Address or Hostname from
	the drop-down list and entering the IP address or host name in the
	corresponding field.
Primary NTP Server	If you configured the IP camera to obtain its time from an NTP server, enter
Port	the primary NTP server port number.
	Valid values are 123 and 1024 through 65535. The default port is 123.
Secondary NTP Server	If you configured the IP camera to obtain its time from an NTP server,
	identify the secondary NTP server by choosing IP Address or Hostname
	from the drop-down list and entering the IP address or host name in the
	corresponding field.
Secondary NTP Server	If you configured the IP camera to obtain its time from an NTP server, enter
Port	the optional secondary NTP server port number.
	Valid values are 123 and 1024 through 65535. The default port is 123.

Discovery Settings Window

The Discovery Settings window provides options for configuring the IP camera to work with Cisco Discovery Protocol or Bonjour. These applications facilitate monitoring and management of your network.

To display the Discovery window, access the configuration windows as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5, click Network Setup, then click Discovery.

If you change any options in this window, you must click the Save Settings button to save the changes. If you do not click this button, changes are not retained when you exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.

Table 3-12describes the options in the Discovery Settings window.

Table 3-12 Discovery Settings Window Options

Option

Description

Cisco Discovery Protocol (CDP) Area

Enable CDP	Check this check box if CDP is enabled in your network and you want the
	IP camera to broadcast CDP discovery messages.
Show Neighbors button	Displays a new window with information about CDP-enabled device
	neighbors in your network.
Bonjour Area
Enable Bonjour	Check this check box if Bonjour is enabled in your network and you want the
	IP camera to broadcast Bonjour discovery messages.

	Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
3-20	OL-19609-04