Cisco Systems 4300 manual Set Time Mode Area, Local Time Area, You click Save Settings

Chapter 3 Configuring and Managing the IP Camera

Network Setup Windows

Table 3-11	Time Settings Window Options
Option		Description
Set Time Mode Area
Manually Configure		Choose this option if you want to set the time for the IP camera manually.
Time
Use NTP Server to		Choose this option if you want the IP camera to obtain its time from a
Update Time		network time protocol (NTP) server.
		If you check this check box, the camera contacts the designated NTP server
		every 64 seconds and synchronizes its internal clock with the time of that
		server.

Local Time Area

Note These options do not apply if you choose the Use NTP Server to Update Time option.

Set Local Date	Enter a date for the IP camera. The camera is updated with this date when
	you click Save Settings.
Set Local Time	Enter a time for the IP camera. The camera is updated with this time when
	you click Save Settings.
Clone PC Time button	Click this button to update the IP camera date and time with the date and time
	of the PC that you are using.
Time Zone and Daylight Saving Area
Time Zone	Choose the time zone in which the IP camera is located.
	The time that appears when you view video from this IP camera reflects this
	time zone.
Adjust for Daylight	Check this check box if you want the time of the IP camera to adjust
Saving Time	automatically for daylight saving time.
Edit Default Daylight	Check this check box if you want the daylight saving time adjustment of the
Saving Configuration	IP camera to be different than the default adjustment for the selected time
for Time Zone	zone.
Time Offset	If you choose to overwrite the default time zone configuration, enter the
	number of minutes that the time of the camera adjusts when daylight saving
	time starts.
	The camera automatically adjusts its time back by this number of minutes
	when daylight saving time ends.
Start Date	If you choose to overwrite the default time zone configuration, enter the day
Start Time	and time (in 24 hour format) that daylight saving time begins. At this day and
	time, the time of the IP camera adjusts by the value in the Time Offset field.
End Date	If you choose to overwrite the default time zone configuration, enter the day
End Time	and time (in 24 hour format) that daylight saving time ends. At this day and
	time, the time of the IP camera adjusts to the non-daylight saving time.

	Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
OL-19609-04		3-19