Cisco Systems 4300 manual Administrator Accounts Area, Access Protocols Area, Ssh

Chapter 3 Configuring and Managing the IP Camera

Administration Windows

To display the Account Initialization window, access the configuration windows as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5, click Administration, then click Initialization.

If you change any options in this window, you must click the Save Settings button to save the changes. If you do not click this button, changes are not retained when you exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.

Table 3-17describes the options in the Account Initialization window.

Table 3-17 Account Initialization Window Options

Option

Description

Administrator Accounts Area

Protocol	Display only. Indicates the protocol that the corresponding administrator can
	use to access the IP camera: HTTP/HTTPS or SSH.
User Name	Display only. Indicates the default user name for the corresponding
	administrator: admin or root
Password	Enter a password for the corresponding administrator. The password is case
	sensitive and must contain from 8 to 32 characters, which can be letters,
	numbers, and special characters, but no spaces. Special characters are: ! $ (
	) - . @ ^ _ ` { } ~
Confirm password	Re-enter the password for the corresponding administrator.
Access Protocols Area
Enable HTTP	Check this check box if you want to allow HTTP connections to the IP
	camera.
HTTP Port	Enter the HTTP port that is used to access the IP camera. Valid port numbers
	are 80 and 1024 through 32767. The default port is 80.
	If you configure the HTTP port to a value other than 80, you must specify
	the port number in the URL for the IP camera when you access it through an
	HTTP connection. For example, if the IP address of the IP camera is
	192.168.1.100 and the HTTP port is 1024, enter this URL for the IP camera:
	http://192.168.1.100:1024.
Enable HTTPS	Check this check box if you want to allow HTTPS connections to the IP
	camera.
HTTPS Port	Enter the HTTPS port that is used to access the IP camera. Valid port
	numbers are 443 and 1024 through 65535. The default port is 443.
	If you configure the HTTPS port to a value other than 443, you must specify
	the port number in the URL for the IP camera when you access it through an
	HTTPS connection. For example, if the IP address of the IP camera is
	192.168.1.100 and the HTTPS port is 1024, enter this URL for the IP
	camera: https://192.168.1.100:1024.
Enable Secure Shell	Check this check box if you want to allow access to the camera through a
(SSH)	SSH connection.
Secure Shell (SSH) Port	Enter the SSH port that is used to access the IP camera. Valid port numbers
	are 22 and 1024 through 65535. The default port is 22.

	Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
OL-19609-04		3-27