Cisco Systems 4300 manual Option

Chapter 3 Configuring and Managing the IP Camera

Feature Setup Windows

Table 3-7 Event Notification Window Options (continued)

Option

Actions

Description

Check the desired check boxes to designate that actions that the IP camera takes when the corresponding trigger occurs.

•Email—Sends information about the event in an e-mail message to the designated recipient. You design the recipient and configure other e-mail options in other fields in this window.

•Output 1—Changes the state of the output 1 port on the IP camera as defined in the Port Settings window.

•Output 2—Changes the state of the output 2 port on the IP camera as defined in the Port Settings window.

•Syslog—Sends information about the event to a designated Syslog server.

•HTTP—Sends information about the event as an HTTP stream to a remote system.

Event Scheduling Area

Scheduling Grid	Designate the times at which an event causes the IP camera to take the
	designed actions. If an event occurs during a time that is not designated, the
	IP camera does not take any action.
	Each cell in this grid represents one hour on the corresponding day, starting
	at 12:00 a.m. (0:00). To designate times, click the desired cells. Selected
	cells appear shaded.
	To select all times, click the Set All button.
	To deselect all times, click the Clear All button.
	To change the scheduling settings to the last saved configuration, click
	Undo.
Set All button	Selects all cells in the scheduling grid.
Clear All button	Deselects all cells in the scheduling grid.
Undo All button	Deselects cells in the scheduling grid that you selected since last saving
	Event Notification window settings.
HTTP Notification Area
Primary HTTP Server	Identify the primary server to which HTTP messages are sent by choosing
	IP Address or Hostname from the drop-down list and entering the IP
	address or host name in the corresponding field.
URL Base	Enter a string to be used as the prefix in the HTTP URL. The HTTP URL is
	sent in this format:
	http://<IP address>/<URL Base>?<system-provided-name-value-pairs>
	where IP address is the IP address of the destination server, URL Base is the
	string that you enter, and system-provided-name-value-pairsis information
	about the event.
Port Number	Enter the port number that receives messages on the primary server to which
	HTTP messages are sent.

	Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
3-12	OL-19609-04