Cisco Systems 4300 Startstream, Stopstream, TEMPTHRESHOLDT1, TEMPTHRESHOLDT2, TEMPTHRESHOLDT3

Page 64

Chapter 3 Configuring and Managing the IP Camera

Log Windows

Table 3-25

Log Messages

 

 

 

 

 

 

 

 

Message Name

 

Description that Appears in Log File

Explanation

Severity

 

 

 

 

START_STREAM

Channel <channel ID> started

The IP camera began streaming video

6

 

 

streaming to user <user> <IP address

to a user device.

 

 

 

or hostname>.

 

 

 

 

 

 

STOP_STREAM

Channel <channel ID> stopped

The IP camera stopped streaming

6

 

 

streaming to user <user> <IP address

video to a user device.

 

 

 

or hostname>.

 

 

 

 

 

 

TEMP_THRESHOLD_T1

Current temperature, <temperature>,

The internal temperature of the IP

2

 

 

<exceeds/is below> <high temperature/

camera is lower than 59°F (15°C) or

 

 

 

low_temperature> threshold.

higher than 149°F (65°C).

 

 

 

 

 

TEMP_THRESHOLD_T2

Current temperature, <temperature>,

The internal temperature of the IP

4

 

 

<exceeds/is below> <high temperature/

camera is lower than 32°F (0°C) or

 

 

 

low_temperature> threshold.

higher than 176°F (80°C).

 

 

 

 

 

TEMP_THRESHOLD_T3

Current temperature, <temperature>,

The internal temperature of the IP

5

 

 

<exceeds/is below> <high temperature/

camera is lower than 5°F (–15°C) or

 

 

 

low_temperature> threshold.

higher than 194°F (90°C).

 

 

 

 

 

 

TILT

 

Tilt <up/down> by user <user>

The IP camera was tilted by a user.

6

 

 

<IP address or hostname>.

 

 

 

 

 

 

TIME_DST_SWITCH

Time switched to Daylight Savings

The IP camera internal clock switched

6

 

 

time with an offset of <offset> minutes.

to daylight saving time.

 

 

 

 

 

TIME_REG_SWITCH

Time switched from Daylight Savings

The IP camera internal clock switched

6

 

 

time with an offset of <offset> minutes.

to standard time.

 

 

 

 

 

UNEXPECTED_EXCEPTION

Unexpected exception occurred. Pan

An attempt by a user to pan the IP

1

 

 

<left/right> failed by user <user> <IP

camera failed.

 

 

 

address or hostname>.

 

 

 

 

 

 

UNEXPECTED_EXCEPTION

Unexpected exception occurred. Tilt

An attempt by a user to tilt the IP

1

 

 

<up/down> failed by user <user>

camera failed.

 

 

 

<IP address or hostname>.

 

 

 

 

 

 

UNEXPECTED_EXCEPTION

Unexpected exception occurred. Patrol

An attempt by a user to start a patrol

1

 

 

failed by user <user> <IP address or

sequence failed.

 

 

 

hostname>.

 

 

 

 

 

 

UNEXPECTED_EXCEPTION

Unexpected exception occurred. Could

IP camera could not read or write

2

 

 

not <read/write> <to/from> repository

information to its internal repository.

 

 

 

by user <user> <IP address or

 

 

 

 

hostname>.

 

 

 

 

 

 

 

 

Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide

3-40

OL-19609-04

Image 64
Contents Americas Headquarters Text Part Number OL-19609-04Copyright 2009-2011 Cisco Systems, Inc. All rights reserved N T E N T S Log Windows Overview OrganizationPreface IP Camera Features OverviewIP Camera Physical Details Adjusting Back Focus on the IP Camera section on Front of IP CameraRear of IP Camera Described in the Resetting the IP Camera section on Side of IP CameraDC Auto Iris Lens Connector Pinouts Package ContentsInstalling the IP Camera Getting StartedAction Explanation Action Explanation Action Explanation Procedure Performing the Initial Setup of the IP CameraBefore you Begin Accessing the IP Camera Protocol//ipaddressUnderstanding the IP Camera User Interface IP Camera Window LinksLink Description IP Camera WindowsField Description Adjusting Back Focus on the IP Camera LAN IPIO Port Status Channel 1 and ChannelPowering the IP Camera On or Off Resetting the IP CameraInitial Setup of the IP Camera Reset Type Procedure RemarksSection on OL-19609-04 Configuring and Managing the IP Camera Accessing Navigating the Configuration WindowsFeature Setup Windows SnmpResolution Primary fps Secondary fps Streaming Settings WindowStreaming Option Description Streaming Setup AreaCurrent Channel Area Audio Setup Area Video AreaVideo Adjustments Area Camera Settings WindowMicrophone Area Described in , Viewing Live Video Day Night Filter AreaVideo Overlay Settings Window IO Ports Settings WindowText Overlay Area IO PortsInput Ports Area Pan Tilt Settings WindowOutput Ports Event Notification Window RS-232 SettingsPan/Tilt Area Event Triggering Area Option Email Notification Area Patrol Sequence Window Patrol Sequence Area Basic Settings Window Network Setup WindowsAnalytics Windows IP Addressing Window Basic Settings AreaBasic Device Operations Area Time Settings Window IP Addressing AreaSet Time Mode Area You click Save SettingsLocal Time Area Clone PC Time buttonDiscovery Settings Window NTP Server Settings AreaCisco Discovery Protocol CDP Area Show Neighbors buttonSnmp v2c Area Snmp Settings WindowSnmp v3 Area 8000000901IPv4addresshex 802.1x Settings Window EAP-PEAP Configuration Options IP Filter Settings WindowEAP-FAST Configuration Options QoS Settings Window Class of Service CoS AreaIP Filter Area Filter Entries AreaDifferentiated Services DiffServ Area Administration WindowsAccount Initialization Window Access Protocols Area Administrator Accounts AreaSSH User Settings Window User List AreaChange button Maintenance Settings WindowDelete button Factory Default Area Restore buttonReset button Reboot Area Reboot buttonAddressing Window section on Firmware Settings WindowDevice Information Area Firmware Maintenance Area Upgrade buttonDevice Processes Window Details buttonPassword Complexity Window Log Setup Settings WindowLog Setup Settings Window, Local Log Window, Log WindowsLocal Log Settings Area Syslog Settings AreaLocal Log Window Log List Area Log messages, see -25 onExplanation Severity Defaultsrestored DevicerebootautoDevicerebootmanual EthsignaldegradeLogin OutputoneresetOutputtworeset PowersupplyfailureTimedstswitch TimeregswitchStartstream StopstreamControl Description Video controlsStreaming Settings Window section on Video image controlsImage tools Hotspot Zoom button Hotspot Pan/TiltSave Snapshot button Mirror buttonFull Screen button Audio controlsPresets controls Set Current Preset asAdd Preset Position Preset buttonPan/tilt speed controls Motion detectionMotion detection controls Enable Motion Detection check box Save Settings button Full Screen checkTroubleshooting Troubleshooting Numerics IN-2 Http HttpsLED IN-4IN-5 IN-6 IN-7 IN-8