Cisco Systems 4300 manual Full Screen button, Audio controls

Page 68

Chapter 4 Viewing Live Video

Table 4-1	Camera Video/Control Window Controls (continued)

Control	Description

Restore button	Displays the default video image, which is not rotated and not reversed.

Full Screen button	Displays the video image in full screen mode.
	To return to normal display mode, click the full screen image.

Audio controls

Disable Speaker	Click the Disable Speaker button to mute audio that is sent from the IP camera
toggle button	to the PC that you are using. The button changes to the Enable Speaker button.
	Click the Enable Speaker button to unmute audio. The button changes to the
	Disable button.

Enable Speaker toggle
button

	Mute Microphone	Click the Mute Microphone button to mute the audio stream that is captured
	toggle button	and sent to the IP camera from the internal or external microphone of the PC
		that you are using. When you click this button, the speaker that is attached to
		the IP camera does not play audio that is transmitted from your PC.
		Note If you are simultaneously accessing other IP cameras in different
	Unmute Microphone
	Unmute Microphone	browser sessions on the same PC, clicking this button in one browser
	toggle button	session does not mute the audio that the PC sends to the other IP
		cameras.
		When you click the Mute Microphone button, it changes to the Unmute
		Microphone button. Click the Unmute Microphone button to unmute audio
		that is sent to the IP camera. The button changes to the Mute Microphone
		button.

	Restore button	Resets audio controls to their default values.

Speaker Volume slider	When the speaker is unmuted, drag this slider to adjust the volume at which
and field	your PC speakers play the audio from the IP camera, or enter a value from 0
	through 100 and press the Enter key.
	The default value is 50.

Microphone	Drag this slider to adjust the gain of the PC microphone (that is, how sensitive
Sensitivity slider and	it is to the audio that it picks up and that is sent to the IP camera), or enter a
field	value from 0 through 100 and press the Enter key.
	The default value is 50.

Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide

4-4	OL-19609-04

Image 68

Contents Americas Headquarters Text Part Number OL-19609-04Copyright 2009-2011 Cisco Systems, Inc. All rights reserved N T E N T S Log Windows Overview OrganizationPreface IP Camera Features OverviewIP Camera Physical Details Adjusting Back Focus on the IP Camera section on Front of IP CameraRear of IP Camera Described in the Resetting the IP Camera section on Side of IP CameraDC Auto Iris Lens Connector Pinouts Package ContentsInstalling the IP Camera Getting StartedAction Explanation Action Explanation Action Explanation Before you Begin Performing the Initial Setup of the IP CameraProcedure Accessing the IP Camera Protocol//ipaddressUnderstanding the IP Camera User Interface IP Camera Window LinksField Description IP Camera WindowsLink Description Adjusting Back Focus on the IP Camera LAN IPIO Port Status Channel 1 and ChannelPowering the IP Camera On or Off Resetting the IP CameraSection on Reset Type Procedure RemarksInitial Setup of the IP Camera OL-19609-04 Configuring and Managing the IP Camera Accessing Navigating the Configuration WindowsFeature Setup Windows SnmpStreaming Streaming Settings WindowResolution Primary fps Secondary fps Current Channel Area Streaming Setup AreaOption Description Audio Setup Area Video AreaMicrophone Area Camera Settings WindowVideo Adjustments Area Described in , Viewing Live Video Day Night Filter AreaVideo Overlay Settings Window IO Ports Settings WindowText Overlay Area IO PortsOutput Ports Pan Tilt Settings WindowInput Ports Area Pan/Tilt Area RS-232 SettingsEvent Notification Window Event Triggering Area Option Email Notification Area Patrol Sequence Window Patrol Sequence Area Analytics Windows Network Setup WindowsBasic Settings Window Basic Device Operations Area Basic Settings AreaIP Addressing Window Time Settings Window IP Addressing AreaSet Time Mode Area You click Save SettingsLocal Time Area Clone PC Time buttonDiscovery Settings Window NTP Server Settings AreaCisco Discovery Protocol CDP Area Show Neighbors buttonSnmp v3 Area Snmp Settings WindowSnmp v2c Area 8000000901IPv4addresshex 802.1x Settings Window EAP-FAST Configuration Options IP Filter Settings WindowEAP-PEAP Configuration Options QoS Settings Window Class of Service CoS AreaIP Filter Area Filter Entries AreaAccount Initialization Window Administration WindowsDifferentiated Services DiffServ Area SSH Administrator Accounts AreaAccess Protocols Area User Settings Window User List AreaDelete button Maintenance Settings WindowChange button Factory Default Area Restore buttonReset button Reboot Area Reboot buttonDevice Information Area Firmware Settings WindowAddressing Window section on Firmware Maintenance Area Upgrade buttonDevice Processes Window Details buttonPassword Complexity Window Log Setup Settings WindowLog Setup Settings Window, Local Log Window, Log WindowsLocal Log Settings Area Syslog Settings AreaLocal Log Window Log List Area Log messages, see -25 onExplanation Severity Defaultsrestored DevicerebootautoDevicerebootmanual EthsignaldegradeLogin OutputoneresetOutputtworeset PowersupplyfailureTimedstswitch TimeregswitchStartstream StopstreamControl Description Video controlsStreaming Settings Window section on Video image controlsImage tools Hotspot Zoom button Hotspot Pan/TiltSave Snapshot button Mirror buttonFull Screen button Audio controlsPresets controls Set Current Preset asAdd Preset Position Preset buttonPan/tilt speed controls Motion detectionMotion detection controls Enable Motion Detection check box Save Settings button Full Screen checkTroubleshooting Troubleshooting Numerics IN-2 Http HttpsLED IN-4IN-5 IN-6 IN-7 IN-8