Cisco Systems 4300 manual Firmware Settings Window, Addressing Window section on

Page 55

Chapter 3 Configuring and Managing the IP Camera

Administration Windows

Table 3-19

Maintenance Settings Window Options (continued)

 

 

 

Option

 

Description

 

 

Import configuration to

Path and folder where a configuration file is stored. You can click Browse to

camera

 

find this location. After you enter this information, click Import to load the

 

 

configuration file to the IP camera.

 

 

After you upload a configuration file to the IP camera, the IP camera restarts

 

 

automatically.

 

 

If you upload configuration from another IP camera that is active in your

 

 

network, make sure to configure this IP camera with a name, description, and

 

 

unique IP address (if not obtained through DHCP). To change these options,

 

 

see the “Basic Settings Window” section on page 3-16and the “IP

 

 

Addressing Window” section on page 3-17.

 

 

A configuration file that you upload includes the passwords that are

 

 

configured for the administrator and for users. If you change any passwords

 

 

after saving the configuration file, be aware that uploading the file overwrites

 

 

the new passwords with the saved ones.

 

 

 

Firmware Settings Window

The Firmware Settings window lets you view information about the firmware that is installed on the IP camera and upgrade the firmware.

Before you upgrade firmware, download the firmware file to a PC that is accessible on your network and unzip the file if it is zipped. To download firmware, go to this web page:

http://www.cisco.com/en/US/products/ps6918/Products_Sub_Category_Home.html

After you upgrade firmware, the IP camera restarts automatically. It retains all configuration information.

To display the Firmware Settings window, access the configuration windows as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5, click Administration, then click Firmware.

If you change any options in this window, you must click the Save Settings button to save the changes. If you do not click this button, changes are not retained when you exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.

Table 3-20describes the options in the Firmware Settings window.

Table 3-20 Firmware Settings Window Options

Option

Description

Device Information Area

IP Address

Display only. IP address of the IP camera

 

 

MAC Address

Display only. MAC address of the IP camera.

 

 

Device Name

Display only. ID of the IP camera, as configured in the Basic Settings

 

window. For more information, see the “Basic Settings Window” section on

 

page 3-16.

 

 

 

 

Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide

 

 

 

 

 

 

OL-19609-04

 

 

3-31

 

 

 

 

 

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Text Part Number OL-19609-04 Americas HeadquartersCopyright 2009-2011 Cisco Systems, Inc. All rights reserved N T E N T S Log Windows Organization OverviewPreface Overview IP Camera FeaturesIP Camera Physical Details Front of IP Camera Adjusting Back Focus on the IP Camera section onRear of IP Camera Side of IP Camera Described in the Resetting the IP Camera section onPackage Contents DC Auto Iris Lens Connector PinoutsGetting Started Installing the IP CameraAction Explanation Action Explanation Action Explanation Procedure Performing the Initial Setup of the IP CameraBefore you Begin Protocol//ipaddress Accessing the IP CameraIP Camera Window Links Understanding the IP Camera User InterfaceLink Description IP Camera WindowsField Description Channel 1 and Channel Adjusting Back Focus on the IP CameraLAN IP IO Port StatusResetting the IP Camera Powering the IP Camera On or OffInitial Setup of the IP Camera Reset Type Procedure RemarksSection on OL-19609-04 Accessing Navigating the Configuration Windows Configuring and Managing the IP CameraSnmp Feature Setup WindowsResolution Primary fps Secondary fps Streaming Settings WindowStreaming Option Description Streaming Setup AreaCurrent Channel Area Video Area Audio Setup AreaVideo Adjustments Area Camera Settings WindowMicrophone Area Day Night Filter Area Described in , Viewing Live VideoIO Ports Video Overlay Settings WindowIO Ports Settings Window Text Overlay AreaInput Ports Area Pan Tilt Settings WindowOutput Ports Event Notification Window RS-232 SettingsPan/Tilt Area Event Triggering Area Option Email Notification Area Patrol Sequence Window Patrol Sequence Area Basic Settings Window Network Setup WindowsAnalytics Windows IP Addressing Window Basic Settings AreaBasic Device Operations Area IP Addressing Area Time Settings WindowClone PC Time button Set Time Mode AreaYou click Save Settings Local Time AreaShow Neighbors button Discovery Settings WindowNTP Server Settings Area Cisco Discovery Protocol CDP AreaSnmp v2c Area Snmp Settings WindowSnmp v3 Area 8000000901IPv4addresshex 802.1x Settings Window EAP-PEAP Configuration Options IP Filter Settings WindowEAP-FAST Configuration Options Filter Entries Area QoS Settings WindowClass of Service CoS Area IP Filter AreaDifferentiated Services DiffServ Area Administration WindowsAccount Initialization Window Access Protocols Area Administrator Accounts AreaSSH User List Area User Settings WindowChange button Maintenance Settings WindowDelete button Reboot Area Reboot button Factory Default AreaRestore button Reset buttonAddressing Window section on Firmware Settings WindowDevice Information Area Details button Firmware Maintenance AreaUpgrade button Device Processes WindowLog Windows Password Complexity WindowLog Setup Settings Window Log Setup Settings Window, Local Log Window,Syslog Settings Area Local Log Settings AreaLocal Log Window Log messages, see -25 on Log List AreaExplanation Severity Ethsignaldegrade DefaultsrestoredDevicerebootauto DevicerebootmanualPowersupplyfailure LoginOutputonereset OutputtworesetStopstream TimedstswitchTimeregswitch StartstreamVideo controls Control DescriptionVideo image controls Streaming Settings Window section onMirror button Image tools Hotspot Zoom buttonHotspot Pan/Tilt Save Snapshot buttonAudio controls Full Screen buttonPreset button Presets controlsSet Current Preset as Add Preset PositionMotion detection Pan/tilt speed controlsMotion detection controls Enable Motion Detection check box Full Screen check Save Settings buttonTroubleshooting Troubleshooting Numerics IN-2 Https HttpIN-4 LEDIN-5 IN-6 IN-7 IN-8
Top Page Image Contents