4XEM IPCAMWFD manual

Page 15

The IP addresses shown in the "Current IP Address" field reflect those on the local network. They may be from the DHCP server. If there is no DHCP server, the camera will try to find a free IP address (this takes from 15 second to 3 minutes, depending on the LAN status). The method of finding IP address is seeking from 192.168.0.99, to 192.168.0.254. If any of the address inside this range is free, the Network Camera will be assigned to this IP address, and its subnet mask would be 255.255.255.0. If none of the addresses is free, the Network Camera will try the range from 192.168.0.2 to 192.168.0.98. After an IP address is assigned to the camera, the “Activity” status LED blinks.

The new UPnP function will always assign an IP address for the Network Camera. The Administrator can click on button “Link to selected device” to connect the I.E. to the camera. If the camera is not on the IP installer list, click on the “Search” button to search for the camera on the LAN.

- 11 -

Image 15
Contents Page Page Before You Use This Product Package Contents Table of Contents Appendix Smtp FTPPage Ethernet Connection Hardware InstallationMount the Camera Page Page Page Software Installation Page Page Page Installing Plug-in Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access Check Network SettingsAuthentication How to UseMain Screen with Camera View Primary User’s CapabilitiesCamera view ConfigurationBoth Client SettingsPage Fine-tuning for Best Performance Administrator’s CapabilitiesSomewhere Between Real-time and Clear Images For Best Real-time Video ImagesOnly Quality Images Will Do Select for Motion Jpeg Opening Accounts for New Users Protect Network Camera by PasswordsBuild a Multimedia Web Attraction Site Demo on Multiple Sites Mid-scale ServiceProduct Demo for E-business Large-scale Service If the web space has FTP servicePage If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is DetectedPage Definitions in Configuration System Parameters User Group Administration Page Edit User General Network SettingsStreaming Ddns & UPnP Page Smtp Mail & FTPPage Page Video Codec Parameters Page Contrast Hue Saturation Image SettingsCamera Settings Audio Page Motion Detection Application Setup Weekly ScheduleEvent Operation Sequential Operation FTP Naming rule of snapshot filePage Factory Default Viewing System LogViewing System Parameters Appendix TroubleshootingFrequently Asked Questions Page Page URL commands of Network Camera OverviewStyle convention General CGI URL syntax and parameters Get server parameter valuesMethod GET/POST Parameter pair Set server parameter valuesParameter pair Yyyy/mm/dd WirelessNetwork Camera With Pan/Tilt/ZoomSkip to invoke default server Available parameters on the serverNTP Group Security 192.168.0.99255.255.255.0 Dns1 IP address Primary DNS server 5002 5003120 384000For Ntsc only 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Query status of the digital input Drive the digital outputQuery status of the digital output Capture single snapshot Edit Account managementPrivilege=dido&privilege=listen System logsSystem Information Configuration filePage Preset Locations Networking Technical Specifications