4XEM IPCAMWFD manual Ddns & UPnP

Page 41

DDNS & UPnP

“Enable DDNS” This option turns on the DDNS function.

“Provider” The provider list contains four hosts that provide DDNS services. Please connect to the service provider’s website to make sure the service charges.

“Host Name” If the User wants to use DDNS service, this field must be filled. Please input the hostname that is registered in the DDNS server.

“Username/E-mail”The Username or E-mail field is necessary for logging in the DDNS server or notify the User of the new IP address. Note: when this field is input as “Username” the following field must be input as “Password”.

“Password/Key” Please input the password or key to get the DDNS service. “Enable UPnP” This turns on or off the UPnP function. When UPnP is turned off, the camera cannot be found through network neighbors in MS Windows XP. If the UPnP network component is installed in Windows XP, the hostname of the Network Camera will be shown with bracketed IP address in the Network neighbors. Ex: Network Camera (xxx.xxx.xxx.96). That is: The hostname of the Network Camera is “Network Camera ”, and the IP address of the Network Camera is xxx.xxx.xxx.96, depends on the last value of the IP address assigned to the Network Camera.

“Save” Click on this button to save current settings for the DDNS service and UPnP function.

- 37 -

Image 41

Contents Page Page Before You Use This Product Package Contents Table of Contents Appendix Smtp FTPPage Ethernet Connection Hardware InstallationMount the Camera Page Page Page Software Installation Page Page Page Installing Plug-in Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access Check Network SettingsAuthentication How to UseMain Screen with Camera View Primary User’s CapabilitiesCamera view ConfigurationBoth Client SettingsPage Fine-tuning for Best Performance Administrator’s CapabilitiesOnly Quality Images Will Do Somewhere Between Real-time and Clear ImagesFor Best Real-time Video Images Select for Motion Jpeg Opening Accounts for New Users Protect Network Camera by PasswordsProduct Demo for E-business Large-scale Service Demo on Multiple Sites Mid-scale ServiceIf the web space has FTP service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is DetectedPage Definitions in Configuration System Parameters User Group Administration Page Edit User General Network SettingsStreaming Ddns & UPnP Page Smtp Mail & FTPPage Page Video Codec Parameters Page Contrast Hue Saturation Image SettingsCamera Settings Audio Page Motion Detection Event Operation Application SetupWeekly Schedule Sequential Operation FTP Naming rule of snapshot filePage Viewing System Parameters Factory DefaultViewing System Log Appendix TroubleshootingFrequently Asked Questions Page Page Style convention URL commands of Network CameraOverview Method GET/POST General CGI URL syntax and parametersGet server parameter values Parameter pair Set server parameter valuesParameter pair Skip to invoke default server WirelessNetwork Camera With Pan/Tilt/ZoomAvailable parameters on the server Yyyy/mm/ddNTP 255.255.255.0 Group Security192.168.0.99 Dns1 IP address Primary DNS server 5002 5003For Ntsc only 120384000 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Query status of the digital input Drive the digital outputQuery status of the digital output Capture single snapshot Edit Account managementPrivilege=dido&privilege=listen System logsSystem Information Configuration filePage Preset Locations Networking Technical Specifications