4XEM IPCAMWFD manual Ntsc & Cmos

Page 74

Save

Directly save the adjust image parameters

Group: Motion

NAME	VALUE		DESCRIPTION

enabled	0		disable motion detection
(r/w)
(r/w)	1		enable motion detection

winenabled_<1~3	0		disable motion window #1
>
>	1		enable motion window #1
(r/w)

winname_<1~3>	<text string shorter		name of motion window #1
(r/w)	than 14 characters >		<blank>

winleft_<1~3>	0	~ 352 for CCD	Left coordinate of window position.
(r/w)	0	~ 320 for CMOS	<0>

wintop_<1~3>	0	~ 288 for PAL	Top coordinate of window position.
(r/w)	0	~ 240 for	<0>
	NTSC & CMOS

winwidth_<1~3>	0	~ 352 for CCD	Width of motion detection window.
(r/w)	0	~ 320 for CMOS	<0>

winheight_<1~3>	0	~ 288 for PAL	Height of motion detection window.
(r/w)	0	~ 240 for	<0>
	NTSC & CMOS

winobjsize_<1~3>	0	~ 100	Percent of motion detection window
(r/w)			<0>

winsensitivity_<1~	0	~ 100	Sensitivity of motion detection
3>			window
(r/w)			<0>

update	1		Update the above motion detection
(w)			settings to take effect

Group: DDNS

NAME	VALUE		DESCRIPTION

enable	0, 1		Enable or disable the dynamic dns.
(r/w)			<0>

		- 70 -

Image 74

Contents Page Page Before You Use This Product Package Contents Table of Contents Smtp FTP AppendixPage Hardware Installation Ethernet ConnectionMount the Camera Page Page Page Software Installation Page Page Page Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewConfiguration Camera viewClient Settings BothPage Administrator’s Capabilities Fine-tuning for Best PerformanceOnly Quality Images Will Do Somewhere Between Real-time and Clear ImagesFor Best Real-time Video Images Select for Motion Jpeg Protect Network Camera by Passwords Opening Accounts for New UsersIf the web space has FTP service Demo on Multiple Sites Mid-scale ServiceProduct Demo for E-business Large-scale Service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Send Snapshots When Motion is Detected Build a Security ApplicationPage Definitions in Configuration System Parameters User Group Administration Page Edit User Network Settings GeneralStreaming Ddns & UPnP Page Mail & FTP SmtpPage Page Video Codec Parameters Page Image Settings Contrast Hue SaturationCamera Settings Audio Page Motion Detection Event Operation Application SetupWeekly Schedule Sequential Operation Naming rule of snapshot file FTPPage Viewing System Parameters Factory DefaultViewing System Log Troubleshooting AppendixFrequently Asked Questions Page Page Style convention URL commands of Network CameraOverview Method GET/POST General CGI URL syntax and parametersGet server parameter values Set server parameter values Parameter pairParameter pair Available parameters on the server WirelessNetwork Camera With Pan/Tilt/ZoomSkip to invoke default server Yyyy/mm/ddNTP 255.255.255.0 Group Security192.168.0.99 Dns1 IP address Primary DNS server 5003 5002For Ntsc only 120384000 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Drive the digital output Query status of the digital inputQuery status of the digital output Capture single snapshot Account management EditSystem logs Privilege=dido&privilege=listenConfiguration file System InformationPage Preset Locations Technical Specifications Networking