4XEM IPCAMWFD manual 8000

Page 72

(r/w)(in server				1		PAL
version only)
version only)				2		AUTO
(restart)

actualmodulation				0		NTSC
(r)
(in built-in CCD
(in built-in CCD				1		PAL
version only)

flip				1		flip image
(r/w)
(r/w)				0		normal image

mirror				1		mirror image
(r/w)
(r/w)				0		normal image

imprinttimestamp				1		Overlay time stamp on video
(r/w)
(r/w)				0		Do not overlay time stamp on video

udpslowstart				1		Enable udp slow start

				0		Disable udp slow start

Group: Audio

NAME		VALUE			DESCRIPTION

bitrate		8000			set bitrate to 8K bps
(r/w)
(r/w)		24000			set bitrate to 24K bps

		32000			set bitrate to 32K bps

transfermode		0			Full-duplex (Talk & Listen simultaneously)
(r/w)
(r/w)		1			Half-duplex (Talk or Listen, not at the same
					time)

		2			Simplex – Talk only

		3			Simplex – Listen only

		4			Disable audio

sendclientaudio		0			Do not send audio from active client to all
(r/w)					other clients

		1			Send audio from active client to all other
					clients (only possible in Half-duplex)

source (r/w)		0			Use external microphone in

		1			Use build microphone

- 68 -

Image 72

Contents Page Page Before You Use This Product Package Contents Table of Contents Smtp FTP AppendixPage Hardware Installation Ethernet ConnectionMount the Camera Page Page Page Software Installation Page Page Page Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewConfiguration Camera viewClient Settings BothPage Administrator’s Capabilities Fine-tuning for Best PerformanceSomewhere Between Real-time and Clear Images For Best Real-time Video ImagesOnly Quality Images Will Do Select for Motion Jpeg Protect Network Camera by Passwords Opening Accounts for New UsersDemo on Multiple Sites Mid-scale Service Product Demo for E-business Large-scale ServiceIf the web space has FTP service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Send Snapshots When Motion is Detected Build a Security ApplicationPage Definitions in Configuration System Parameters User Group Administration Page Edit User Network Settings GeneralStreaming Ddns & UPnP Page Mail & FTP SmtpPage Page Video Codec Parameters Page Image Settings Contrast Hue SaturationCamera Settings Audio Page Motion Detection Application Setup Weekly ScheduleEvent Operation Sequential Operation Naming rule of snapshot file FTPPage Factory Default Viewing System LogViewing System Parameters Troubleshooting AppendixFrequently Asked Questions Page Page URL commands of Network Camera OverviewStyle convention General CGI URL syntax and parameters Get server parameter valuesMethod GET/POST Set server parameter values Parameter pairParameter pair WirelessNetwork Camera With Pan/Tilt/Zoom Skip to invoke default serverAvailable parameters on the server Yyyy/mm/ddNTP Group Security 192.168.0.99255.255.255.0 Dns1 IP address Primary DNS server 5003 5002120 384000For Ntsc only 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Drive the digital output Query status of the digital inputQuery status of the digital output Capture single snapshot Account management EditSystem logs Privilege=dido&privilege=listenConfiguration file System InformationPage Preset Locations Technical Specifications Networking