4XEM IPCAMWFD manual Ntp

Page 67

timezone	-12 ~ 12		time zone, 8 means GMT +8:00
(r/w)			<8>

updateinterval	0 ~ 2592000		0 to Disable automatic time
(r/w)			adjustment, otherwise, it means the
			seconds	between	NTP	automatic
			update interval.
			<0>

serialnumber	<mac address>		12 characters mac address without
(r)			hyphen connected

firmwareversion	<text string	shorter	The version of firmware, including
(r)	than 39 characters>		model, company, and version number

restore	0		Restore the system parameters to
(w)			default value.

	Positive integer		Restore the system parameters to
			default value and restart the server
			after <value> seconds.

reset	0 ~ 65535		Restart the server after <value>
(w)			seconds.

	-1		Not restart the server.

do<1~4>	<state>		H – NC connected with COMMON
(w)
(w)			L – NO connected with COMMON

di<1~4>	<state>		H – NC connected with COMMON
(r)
(r)			L – NO connected with COMMON

supportscriptversion	<text string	shorter	The	version	of	supported
(r)	than 10 characters>		script/webpage

scriptversion	<text string	shorter	The maximum version of currently
	than 10 characters >		installed script/webpage

language	<text string	shorter	The webpage language
	than 16 characters>

webpageversion	<text string	shorter	The version of webpage
	than 39 characters>

enableir(r/w)	0		Turn on the IR control

	1		Turn off the IR control

		- 63 -

Image 67

Contents Page Page Before You Use This Product Package Contents Table of Contents Appendix Smtp FTPPage Ethernet Connection Hardware InstallationMount the Camera Page Page Page Software Installation Page Page Page Installing Plug-in Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access Check Network SettingsAuthentication How to UseMain Screen with Camera View Primary User’s CapabilitiesCamera view ConfigurationBoth Client SettingsPage Fine-tuning for Best Performance Administrator’s CapabilitiesFor Best Real-time Video Images Somewhere Between Real-time and Clear ImagesOnly Quality Images Will Do Select for Motion Jpeg Opening Accounts for New Users Protect Network Camera by PasswordsBuild a Multimedia Web Attraction Site Demo on Multiple Sites Mid-scale ServiceProduct Demo for E-business Large-scale Service If the web space has FTP servicePage If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is DetectedPage Definitions in Configuration System Parameters User Group Administration Page Edit User General Network SettingsStreaming Ddns & UPnP Page Smtp Mail & FTPPage Page Video Codec Parameters Page Contrast Hue Saturation Image SettingsCamera Settings Audio Page Motion Detection Weekly Schedule Application SetupEvent Operation Sequential Operation FTP Naming rule of snapshot filePage Viewing System Log Factory DefaultViewing System Parameters Appendix TroubleshootingFrequently Asked Questions Page Page Overview URL commands of Network CameraStyle convention Get server parameter values General CGI URL syntax and parametersMethod GET/POST Parameter pair Set server parameter valuesParameter pair Yyyy/mm/dd WirelessNetwork Camera With Pan/Tilt/ZoomSkip to invoke default server Available parameters on the serverNTP 192.168.0.99 Group Security255.255.255.0 Dns1 IP address Primary DNS server 5002 5003384000 120For Ntsc only 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Query status of the digital input Drive the digital outputQuery status of the digital output Capture single snapshot Edit Account managementPrivilege=dido&privilege=listen System logsSystem Information Configuration filePage Preset Locations Networking Technical Specifications