4XEM IPCAMWFD manual Sequential Operation

Page 54

snapshots. The date and time suffix may also be added as an option. Confirm the external mail or FTP server settings in the network configuration.

“Reset output” Select and save this option to reset the external device at the digital output to return to the original state.

Sequential Operation

“Snapshot interval” The Network Camera will send snapshots at the specified intervals to the external server.

“Send snapshots by email” This selects the uploading method following the intervals set above. The snapshot will be attached in the email with the subject title “Periodic snapshots”.

“Send snapshots by FTP” The snapshots will be uploaded to the external FTP server with the file name defined in the next option. This can also be used to refresh the captured images stored in the external web server to build creative homepages. “FTP put snapshots with date and time suffix” This option sets up the snapshot capture date and time, which can be used to easily differentiate the snapshot file names in either the sequential or event operation. Please check naming rule of snapshot file for more detail.

- 50 -

Image 54

Contents Page Page Before You Use This Product Package Contents Table of Contents Smtp FTP AppendixPage Hardware Installation Ethernet ConnectionMount the Camera Page Page Page Software Installation Page Page Page Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewConfiguration Camera viewClient Settings BothPage Administrator’s Capabilities Fine-tuning for Best PerformanceSomewhere Between Real-time and Clear Images For Best Real-time Video ImagesOnly Quality Images Will Do Select for Motion Jpeg Protect Network Camera by Passwords Opening Accounts for New UsersIf the web space has FTP service Demo on Multiple Sites Mid-scale ServiceProduct Demo for E-business Large-scale Service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Send Snapshots When Motion is Detected Build a Security ApplicationPage Definitions in Configuration System Parameters User Group Administration Page Edit User Network Settings GeneralStreaming Ddns & UPnP Page Mail & FTP SmtpPage Page Video Codec Parameters Page Image Settings Contrast Hue SaturationCamera Settings Audio Page Motion Detection Application Setup Weekly ScheduleEvent Operation Sequential Operation Naming rule of snapshot file FTPPage Factory Default Viewing System LogViewing System Parameters Troubleshooting AppendixFrequently Asked Questions Page Page URL commands of Network Camera OverviewStyle convention General CGI URL syntax and parameters Get server parameter valuesMethod GET/POST Set server parameter values Parameter pairParameter pair Available parameters on the server WirelessNetwork Camera With Pan/Tilt/ZoomSkip to invoke default server Yyyy/mm/ddNTP Group Security 192.168.0.99255.255.255.0 Dns1 IP address Primary DNS server 5003 5002120 384000For Ntsc only 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Drive the digital output Query status of the digital inputQuery status of the digital output Capture single snapshot Account management EditSystem logs Privilege=dido&privilege=listenConfiguration file System InformationPage Preset Locations Technical Specifications Networking